• November 09, 2024

    Celtic Trivet

    $210.00
    Date: November 9, 2024 Time: 9 AM - 3 PM Location: Adam's Forge Instructor: Leif Bennett Prerequisite: Any Discovery Class. This class is most suitable for the advancing student with an interest in building skills and technique.  While it is not required, we have found that students who have taken several project classes or workshops with us and/or spent time in Open Forge before starting this project are more successful and get more out of this class. This beautiful piece will literally elevate your dining experience!  A classic tripod design makes this trivet both stable and strong.  In this class, Adam’s Forge instructor Leif Bennett will demonstrate the use of various specialized blacksmithing tools with which you’ll create traditional mortise and tenon joints.  With either a guillotine tool or a square-edged spring fuller, you’ll create tenons on each of the three pieces.  You’ll also be using a round punch to hot punch the mortise holes, and finally the monkey tool brings it all together. This trivet can be made with feet to sit on a table, or with pointed ends to sit in an open fire. This project is one of our Tools and Techniques series and successful students will meet the mortise and tenon requirement for CBA Level I certification.  If you've already made a Monkey Tool and/or a round punch, feel free to bring them along and put them to use!

    Please note: All classes are released for member-only early registration for one week before they're available for general registration.  If you're unable to add this class to your cart, you can wait for general release or join our membership program at any time!

  • September 15, 2024

    Kiridashi

    $225.00
    Click here to see all Knife workshop dates and times Date: September 15, 2024 Suggested Skill Level: Seasoned Beginner Time: 9 AM - 4 PM Location: Adam's Forge Instructor: Kent Lulewich Prerequisite: Letter Opener Discovery Class

    The Kiridashi is the original Japanese utility knife that has historically been used by Samurai and peasants alike.  It’s both light and strong, suitable for a variety of uses.  If you’ve taken the Letter Opener Discovery class, this is a perfect follow up project to build your bladesmithing skills.

    Here, you’ll practice precision forging, learn some of the important considerations in blade design and have a chance to try different texturing methods.  This blade is made from tool steel, so you’ll be heat treating, grinding, polishing and hand sharpening as well.

    This class runs from 9:00am – 4:00pm with an hour meal break.

    Please note: the first week that registration for this workshop is open, spots may only be purchased by members. If you find you are unable to register, please check back after that first week has passed, or consider becoming a member of Adam’s Forge. All proceeds go towards supporting our amazing organization, and membership will bring you exclusive events and opportunities, along with a community of other blacksmiths!

  • October 19, 2024

    Copper Mask Exploration

    $225.00
    Date: October 19, 2024 Time: 10 AM - 4 PM Location: Adam's Forge Prerequisites: None; this class is suitable for beginners.  However, some hammer skills will make this class more rewarding and less frustrating.  Note: this is not a Discovery class.

    Just in time for Halloween!  Enjoy letting your creativity run while learning some of the essentials of forming copper sheet. This will be a wild workshop of taking flat sheet and making a 3-dimensional copper mask. We’ll get to use some of the wonderful tools generously donated from the estate of John Fusco.

    Adam's Forge’s own Heather McLarty and Will Larranaga will cover some of the same skills and knowledge used to form vessels, armor, the Statue of Liberty, and other sculptures. Skills include cutting and dressing the sheet, annealing copper, work hardening, using stakes and other tricks of the trade.

    This class is open to all skill and experience levels. Come ready to jump in, learn, and be creative.

    This class runs from 10:00 am to 4:00 pm with an hour meal break.

    Please note: All classes are released for member-only early registration for one week before they're available for general registration.  If you're unable to add this class to your cart, you can wait for general release or join our membership program at any time!

  • July 20, 2024 - July 21, 2024

    Chasing and Repoussé

    $298.00
      Date: July 20 & 21, 2024 Time: 10 AM - 4 PM Location: Adam's Forge This is an introductory class; no prerequisite is required. Suggested skill level: Beginner through advanced Please note: This class takes place both Saturday and Sunday from 10:00am - 4:00pm Instructor: Heather McLarty Students must attend both sessions. Experience transforming flat sheet metal into three dimensional sculpture using the techniques of repoussé and chasing. These techniques have been used for centuries in many cultures to express the ideas of makers, from jewelry, sword fittings and armor to the Statue of Liberty!   Students are encouraged to design their image and get input from the instructor beforehand. Your sketch should fit inside a 3 or 4 inch square.  Designs may be representational or abstract. We will start with an explanation of the various approaches and talk about design. After a bit of demonstration each student will design and execute their work in sheet copper. We will use pitch in part of the process. There are so many options, come try it for yourself! The fee for the class includes copper sheet. Pitch, pitch bowls and tooling will be provided. Students are encouraged to bring any tooling of their own (such as chasing hammers) but it is not necessary. Heat sources such as heat guns and plumber’s torches will be shared. If you have a heat gun, please bring it.  
  • August 15, 2024

    Tomahawk with Ben Abbott

    $400.00
    Suggested skill level: Seasoned beginner and up. This is a fast-paced class and we'll be moving plenty of metal.  This workshop is suited to those with stamina and experience with high carbon steel. Date: August 15, 2024 Time: 9 AM - 5 PM Location: Adam's Forge Instructor: Ben Abbott The tomahawk is an icon of the old west and the mythical mountaineers of early America. Used and traded among settlers and Native Americans as tools they were extremely important on the frontier. Blacksmiths that knew how to forge these tools were invaluable to individuals facing the rugged wilderness of the new world. Now we get to see it forged to life by Ben Abbott at Adam’s Forge. Join us for a workshop that will elevate your skills at the anvil as you learn from the Forged in fire champion and judge. This workshop will test what you already know and present you with new skills to master. Forge welding and hammering to specific dimensions will be necessary to follow along with Ben.

    You’ll learn to pre-shape a steel bar, set a wrapped-eye forge weld, and do a quick, competition-style quench and temper.

    Please note: All workshops are released for member-only early registration for one week before they're available for general registration.  If you're unable to add this class to your cart, you can wait for general release or join our membership program at any time!
  • August 16, 2024

    Tomahawk with Ben Abbott

    $400.00
    Suggested skill level: Seasoned beginner and up. This is a fast-paced class and we'll be moving plenty of metal. This workshop is suited to those with stamina and experience with high carbon steel. Date: August 16, 2024 Time: 9 AM - 5 PM Location: Adam's Forge Instructor: Ben Abbott The tomahawk is an icon of the old west and the mythical mountaineers of early America. Used and traded among settlers and Native Americans as tools they were extremely important on the frontier. Blacksmiths that knew how to forge these tools were invaluable to individuals facing the rugged wilderness of the new world. Now we get to see it forged to life by Ben Abbott at Adam’s Forge. Join us for a workshop that will elevate your skills at the anvil as you learn from the Forged in fire champion and judge. This workshop will test what you already know and present you with new skills to master. Forge welding and hammering to specific dimensions will be necessary to follow along with Ben.

    You’ll learn to pre-shape a steel bar, set a wrapped-eye forge weld, and do a quick, competition-style quench and temper.

    Please note: All workshops are released for member-only early registration for one week before they're available for general registration.  If you're unable to add this class to your cart, you can wait for general release or join our membership program at any time!
  • August 31, 2023 - September 02, 2023

    Blacksmithing Fundamentals: Tooling I

    $490.00
    Date: August 31, September 1 & 2, 2024 Time: 9 AM - 3 PM Instructor: Dossain Valencia Location: Adam's Forge Prerequisite: Any Discovery Workshop. Please note: This class takes place over three consecutive days. Session 1: 8-31-24 from 9:00am - 3:00pm Session 2: 9-01-24 from 9:00am - 3:00pm Session 3: 9-02-24 from 10:00am - 2:00pm Students must attend all sessions. In this class, you’ll make a set of essential tools of the blacksmith’s trade.  More importantly, with the skills you acquire, you’ll be able to make all kinds of custom tools: punches and chisels for eyes, ears, fins, scales and more.  You’ll make a center punch, scribe, round punch, hot-cut chisel and a very handy set of dividers that can be used with one hand. You’ll learn how to forge, and heat treat tool steel, how to maintain and dress your tools as well as some of the finer points of tool design. For those interested in obtaining CBA (California Blacksmith Association) level I certification, successful completion of this class will satisfy 5 of the requirements needed. To quote one of our instructors: ‘Blacksmithing is a superpower.  I get to make tools that other people have to buy.’ Please note: All workshops are released for member-only early registration for one week before they're available for general registration.  If you're unable to add this class to your cart, you can wait for general release or join our membership program at any time!
  • November 29, 2024 - December 01, 2024

    Honesuki Style Knife

    $600.00
    Date: November 29 & 30 & December 1, 2024 Time:  9AM - 5PM Location: Adam's Forge Skill Level: Seasoned Beginner Prerequisites: Letter Opener Discovery plus Introduction to Bladesmithing or 2-3 of our blade classes. Please note: This workshop takes place over three consecutive days. Each day starts at 9:00am and ends at 5:00pm with an hour meal break. Students must attend all sessions.

    Fresh from Two Fish Cutlery comes Tom Pricone’s newest interpretation of a culinary classic, the Honesuki.  This Japanese boning knife is popular among chefs and home cooks thanks to its nimble geometry and very fine edge.  It’s also versatile enough to use for filleting fish, slicing meat, and dicing veggies.

    At 6-3/4 inches, this is smaller than a chef’s knife, yet the perfect size and shape for most food prep.

    In keeping with our overall approach to blade smithing, the emphasis in this workshop will be on forged to finish blades with minimal stock removal necessary. The impact of design choices on overall functionality, balance, wrist, and hand fatigue will also be explored.  From forging to heat treating, grinding, polishing, handle construction and fit-up, students will have clear instruction and expert assistance each step of the way.

    Rugged, refined, respected.  This cutlery exemplifies functional, elegant beauty.  If you’re serious about making knives, this class is not to be missed!

    Please note: All classes are released for member-only early registration for one week before they're available for general registration.  If you're unable to add this class to your cart, you can wait for general release or join our membership program at any time!
  • September 28, 2024 - September 29, 2024

    Introduction to Damascus Steel

    $650.00
    Click here to see all Knife workshop dates and times Dates & Times: September 28, 2024 from 2:00pm - 10:00pm September 29, 2024 from 2:00pm - 8:00pm Students must attend both days. Location: Adam's Forge Instructor: Dossain Valencia Prerequisites: Any Discovery workshop plus a Power Hammer Safety Workshop.  Previous experience with forge welding is recommended. Suggested Skill Level: Seasoned beginner and up. Participants should have solid blacksmithing skills and be confident using hand tools before moving to the power hammer. In this workshop, Adam's Forge lead instructor Dossain Valencia will guide you in making a pattern-welded Damascus billet using contrasting high carbon steels.  You'll gain instruction in preparing the billets, forge welding, and working with the power hammers & hydraulic press to draw them out.  The process will be repeated several times to increase the number of layers.  Finally, preliminary etching to reveal the pattern will be addressed, followed by a discussion of possible uses as well as tips on working with Damascus for future projects. This workshop will run for 8 hours on day 1 and 6 hours on day 2 with an hour meal break. Please note: the first week that registration for this workshop is open, spots may only be purchased by members. If you find you are unable to register, please check back after that first week has passed, or consider becoming a member of Adam’s Forge. All proceeds go towards supporting our amazing organization, and membership will bring you exclusive events and opportunities, along with a community of other blacksmiths!    
  • November 10, 2024 - November 11, 2024

    Introduction to Damascus Steel

    $650.00
    Click here to see all Knife workshop dates and times Dates & Times: November 10, 2024 from 9:00am - 5:00pm November 11, 2024 from 10:00am - 4:00pm Students must attend both days. Location: Adam's Forge Instructor: Dossain Valencia Prerequisites: Any Discovery workshop plus a Power Hammer Safety Workshop.  Previous experience with forge welding is recommended. Suggested Skill Level: Seasoned beginner and up. Participants should have solid blacksmithing skills and be confident using hand tools before moving to the power hammer. In this workshop, Adam's Forge lead instructor Dossain Valencia will guide you in making a pattern-welded Damascus billet using contrasting high carbon steels.  You'll gain instruction in preparing the billets, forge welding, and working with the power hammers & hydraulic press to draw them out.  The process will be repeated several times to increase the number of layers.  Finally, preliminary etching to reveal the pattern will be addressed, followed by a discussion of possible uses as well as tips on working with Damascus for future projects. This workshop will run for 8 hours on day 1 and 6 hours on day 2 with an hour meal break. Please note: the first week that registration for this workshop is open, spots may only be purchased by members. If you find you are unable to register, please check back after that first week has passed, or consider becoming a member of Adam’s Forge. All proceeds go towards supporting our amazing organization, and membership will bring you exclusive events and opportunities, along with a community of other blacksmiths!
  • October 11, 2024 - October 14, 2024

    Frontier Belt Knife

    $750.00
    Click here to see all Knife workshop dates and times Date: October 11, 12, 13 & 14 Time: 9 AM - 5 PM Location: Adam's Forge Prerequisites: Letter Opener Discovery plus Introduction to Bladesmithing or 2-3 of our blade classes or equivalent.
    Skill Level: Seasoned beginner and up.
    This workshop is for the Frontier Belt Knife only.  If you'd like to make your own custom leather sheath, you can sign up here. Please note: This class takes place over four consecutive morning/afternoon classes.

    Friday 10/11/24 through Monday (Federal Holiday) 10/14/24 from 9:00am - 5:00pm

    Students must attend all sessions.

    Whether you're horseback riding up in the rugged Yukon or the foothills of the Sierras, you'll want to make sure you have this Bowie belt knife by your side. Nothing says adventure and exploration like this extensive knife course to bring your skill set on par with blacksmiths from Early America. If you are a serious survivalist, camper, outdoorsman, or into bushcraft, then this class is tailor made for you. Take it with you wherever you decide to go and know you have a piece forged by you that can stand up to the rigors of untamed nature.

    Come to Adam’s Forge to make your own knife inspired by those the pioneer hunters in early America would have carried alongside them into the unknown wilderness. Over this four-day workshop, students will forge out their own knives.

    Students should be familiar with blade forging processes and have prior prerequisites met to get the most out of this class. Attention to detail on hand hammer techniques to end with a knife that is as close as we can get it to final dimensions is the name of the game.

    These workshops are 8 hours long with an hour meal break.

    Please note: All classes are released for member-only early registration for one week before they're available for general registration.  If you're unable to add this class to your cart, you can wait for general release or join our membership program at any time!

  • August 12, 2024 - August 13, 2024

    Malay Parang Chopper with Ben Abbott

    $800.00
      Date: August 12 & 13, 2024 Time: 9 AM - 5 PM Location: Adam's Forge Instructor: Ben Abbott Please note: This workshop takes place over two consecutive days.  

    Skill Level: Intermediate and up.  This workshop is suited to the smith who has stamina, confidence and experience with bladesmithing.

    You’ve watched Ben Abbott triumph undefeated on Forged in Fire. You’ve worked on your hammer control and perhaps practiced forging blades yourself. Now sign up for the ultimate culmination of the two. This is your chance to learn from Ben himself and forge your own Malay Parang Chopper under his tutelage.

    This small machete from Malaysia is an indispensable tool for yard work, bushcraft and camping applications.  Big enough to chop and clear brush but lean enough to slice and cut food.  Over the course of two days, we will forge and grind the blade, and attach the full-tang handle, working closely with Ben. Go home with your new tool, new knowledge and experience that will raise your work to a new level.

    Please note: the first week that registration for this workshop is open, spots may only be purchased by members. If you find you are unable to register, please check back after that first week has passed, or consider becoming a member of Adam’s Forge. All proceeds go towards supporting our amazing organization, and membership will bring you exclusive events and opportunities, along with a community of other blacksmiths!

     

Title

Go to Top