• September 20, 2021

    Woven Bracelet

    $150.00
    Date: September 20, 2021 Time: 10 AM - 2 PM Location: Adam's Forge Are you ready to forge weld?  Up until modern times, this skill was a closely guarded secret.  In this class, you’ll take a single round bar and using some clever hot folding and forge welding, create a three-piece bracelet.  Adam’s Forge instructor Amanda Kazarian will demonstrate the forge welding, twisting and forming of the open basket weave and finally show you how to form it into a beautiful bracelet that you can custom fit to your liking. The skills learned in this class will easily translate to a wide variety of other items and uses. From hardware to handles to pure ornamentation, this basket weave is a classic design element you’ll want to have in your repertoire. This class is most appropriate for the advancing smith with an interest in building skills and technique. While it is not required, we have found that students who have taken several project classes or workshops with us and/or spent time in Open Forge before starting this project are more successful and get more out of this class. All students must have taken a Discovery class with us.
  • September 25, 2021

    Viking Fire Steel & Belt Buckle

    $175.00
    Date: September 25, 2021 Time: 9 AM - 3 PM Location: Adam's Forge Prepare for your own Viking adventure! This is a perfect class to take after your Discovery day as the stock is small and the items are really impressive. First we will make a Viking style belt buckle. Hard to go adventuring with your pants falling down! Splitting, convenience bends, and tapering will be thoroughly explained.  Then we get to the Fire Steel. Not only are we making the Steel, but we will also teach you how to use it to start a fire: hopefully without burning either your fingers or eyebrows off. Half hammer blows, drawing, tapering, scrolling, hardening and tempering are the skills to be explored.  Prerequisites: Discovery Day This class runs from 9:00AM - 3:00PM with a break for lunch  
  • October 16, 2021

    Railroad Spike Tomahawk

    $175.00
    Prerequisite: Discovery Class Date: October 16, 2021 Time: 9 AM - 3 PM Location: Adam's Forge In this class, Adam's Forge instructor John Drayer will lead students in making a tomahawk out of a railroad spike. Yes, this class is indeed as cool as it sounds. Yes, this class is challenging. First, John will teach students how to upset the railroad spike. What is upsetting? This is the process of thickening steel and moving mass to where you want the mass to go by isolating sections of the material with heat and banging on it with a hammer. Sound fun? You bet! The idea here is to create mass at the end of the railroad spike by upsetting it into itself so that there is enough material to make the tomahawk blade. This is a really great technique and useful for lots of projects where you may need to create mass. Next, John will teach students to punch the railroad spike using a hand held slot punch to create the opening for the eye for the tomahawk. Have you ever thought about how to create a hole without losing mass? This is one of the most useful blacksmith skills! Punching a hole moves mass to the side, and practically no material is wasted. With a nicely punched hole, students will next move on to forging the tomahawk blade using the peen of their hammers. John will be discussing how to alternate between using the peen and flat face of your hammer to control where the metal will go and in what direction. Lastly, John will show students how use a mouse hawk drift to drift open the eye to the size required for the handle, how to file the edge, and how to attach the handle. Please note that this class is not appropriate for the beginning student! Students should have solid blacksmithing skills before signing up for this class. This class is appropriate for the intermediate smith comfortable working with larger size stock and hand tools. We request that students have taken at least 3-5 project classes or workshops with us or have taken the CBA program in the past or are currently enrolled in our Tools and Techniques classes to be eligible for this class. Please do not sign up for this class if you have just taken Discovery! Take some other classes first, and then come back for this one when you have more experience. If you are not sure about your experience level, contact us and we'll help figure out if this class is for you. This class runs from 9 AM - 3 PM, with a one hour break for lunch.
  • September 26, 2021

    Monkey Tool

    $175.00
    Date: September 26, 2021 Time: 9 AM - 3 PM Location: Adam's Forge Instructor: Leif Bennett In this session, students will forge a monkey tool. What is a monkey tool, you ask? A monkey tool is a blacksmithing tool that is used to dress/sharpen the shoulders on tenons. They're also used to tighten two pieces of metal together just before you drive a rivet.  So, if you plan on joining two pieces of metal together using tenons or rivets, this is an essential tool!  Making a monkey tool requires hot punching and drifting an eye in a 1 inch square bar. Once you learn the technique it is applicable to any project that requires an eye. Students interested in making hammers, this class is for you! Or if you'd like to learn to punch and drift a railroad spike to make a tomahawk, this class is for you!  We'll be using these tools next month in our Mortise and Tenon Trivet class.  If you've already made slit and drift tools, you can bring them to class and use them.  If not, don't worry, we'll have everything you need. This class is part of our fundamental blacksmithing tools and techniques series of classes.  Students may take one or more of this series of classes, and may take them in any order. The classes are based on the standards required by the California Blacksmith Association for CBA Level 1 (beginner) certification.  This class is most appropriate for the advancing smith with an interest in building skills and technique. While it is not required, we have found that students who have taken several project classes or workshops with us and/or spent time in Open Forge before starting this project are more successful and get more out of this class. All students must have taken a Discovery class with us. This class runs from 9:00 AM to 3:00PM with a break for lunch.
  • October 07, 2021

    Magic Wands

    $150.00
    Prerequisite: Any Discovery Class Date. October 7, 2021 Time: 6 PM - 10 PM Location: Adam's Forge Could you use more magic in your life?  If so, this is the class for you! This super fun class is a great follow-up to our Discovery class and is suitable for more advanced students as well.   In this class, students will be guided in forging their own magic wands from a 3/8" square bar.  The instructor will demonstrate various design options, including different styles of twists and surface textures.  And they'll assist students as they create their own magic.  Once the wands are made, The instructor will show students how to add an optional magic orb (otherwise known as a marble) to the top of the wand for extra special power.   Finally, they will go over finishing options. All materials will be provided. Students are welcome to bring their own magic orb, if they have one that is extra special. This class runs from 10:00AM to 2:00PM. The prerequisite is any Discovery class.  
  • October 01, 2021

    Long Stemmed Rose

    $150.00
      Date: October 1, 2021 Time: 6 PM - 10 PM Location: Adam's Forge This beautiful rose is made from a single bar of steel.  In this class, Adam’s Forge instructor Amanda Kazarian will lead you on a journey of discovery in which you’ll learn to design, plan the sequence of steps and then forge the stem and petals from a single bar of steel.  In this great follow-up to the Discovery class, you’ll learn more advanced hammer techniques to draw out the individual petals.  The magic starts when the bar is rolled into the rosebud form.  Once you have these basics down, you can experiment with variations and create a bouquet of flowers. These make great gifts! This class runs from 6 p.m. to 10 p.m. Pre-requisite: Any Discovery class SAFETY NOTES: Metalworking involves a certain amount of inherent risk. Many of the tools and techniques used at Adam’s Forge are capable of causing injury. Tools can burn, cut, and abrade. These are merely examples and not a complete list of dangers. If we are all aware and use safe practices we can minimize those dangers, hence the need for a safety policy. Each smith is responsible for their own safety as well as the safety of others nearby. Participants must have instructor clearance before they use any tool. The minimum age to register for this class is 12 years old. All students between the ages of 12 and 17 must be accompanied by an adult while at the Forge. HYDRATION: If you’re not sweating you’re probably not doing it right. Please bring something non-alcoholic to drink. Water works perfectly! PROTECTIVE CLOTHING (COTTON, WOOL, or LEATHER): Nonflammable material is REQUIRED at all times. Tee shirts and jeans are perfect. FOOTWEAR (LEATHER, COTTON): Nonflammable and with the toes covered to protect the feet from the constant production of hot and sharp metal fragments which rain down on the feet constantly is REQUIRED at all times. A steel toe is optional and provides protection against a dropped hammer or work piece. Boots, with the pants outside the boot top will prevent the hot and sharp metal fragments from getting in and burning your feet. Tools and equipment are provided without extra charge. Eye protection is mandatory. Please bring your own safety glasses, or we can provide a new unused pair at no additional cost. Gloves are optional. We recommend that you bring a pair in case you have trouble getting hot pieces in and out of the forge. If you decide you need a pair on the day of your class you can purchase them from Adam's Forge for $5.00.
  • September 28, 2021

    Letter Opener

    $150.00
    Prerequisite: None. This is an introductory class Date: September 29, 2021 Time: 10 AM - 4 PM Location: Adam's Forge The Letter Opener is an introductory class as well as a great next step for students that have taken our Discovery class and want to continue to develop their blacksmithing skills. The Letter Opener class teaches techniques that are useful in a wide range of blacksmithing projects.  You'll learn how to work with slightly larger stock, and be introduced to the proper choice and use of tongs to hold the hot steel. You'll use the vise and a twisting wrench for the handle, and practice tapering and turning scrolls as well.  In forging the blade, you'll learn about full-face and half-face hammer blows.  Finally, you can apply a hot wax finish to protect your letter opener. The class runs from 10 am to 4 pm with a break for lunch. Instructor: Will Larranaga
  • October 08, 2021

    Letter Opener

    $150.00
    Prerequisite: None. This is an introductory class Date: October 8, 2021 Time: 4 PM - 10 PM Location: Adam's Forge The Letter Opener is an introductory class as well as a great next step for students that have taken our Discovery class and want to continue to develop their blacksmithing skills. The Letter Opener class teaches techniques that are useful in a wide range of blacksmithing projects.  You'll learn how to work with slightly larger stock, and be introduced to the proper choice and use of tongs to hold the hot steel. You'll use the vise and a twisting wrench for the handle, and practice tapering and turning scrolls as well.  In forging the blade, you'll learn about full-face and half-face hammer blows.  Finally, you can apply a hot wax finish to protect your letter opener. The class runs from 4 pm to 10 pm with a break for dinner.  
  • October 15, 2021

    Letter Opener

    $150.00
    Prerequisite: None. This is an introductory class Date: October 15, 2021 Time: 10 AM - 4 PM Location: Adam's Forge The Letter Opener is an introductory class as well as a great next step for students that have taken our Discovery class and want to continue to develop their blacksmithing skills. The Letter Opener class teaches techniques that are useful in a wide range of blacksmithing projects.  You'll learn how to work with slightly larger stock, and be introduced to the proper choice and use of tongs to hold the hot steel. You'll use the vise and a twisting wrench for the handle, and practice tapering and turning scrolls as well.  In forging the blade, you'll learn about full-face and half-face hammer blows.  Finally, you can apply a hot wax finish to protect your letter opener. The class runs from 4 pm to 10 pm with a break for dinner.  
  • September 16, 2021

    Letter Opener

    $150.00
    Prerequisite: None.  This is an introductory class. Date: September 16, 2021 Time: 4 PM - 10 PM Location: Adam's Forge The Letter Opener is an introductory class as well as a great next step for students that have taken our Discovery class and want to continue to develop their blacksmithing skills. The Letter Opener class teaches techniques that are useful in a wide range of blacksmithing projects.  You'll learn how to work with slightly larger stock, and be introduced to the proper choice and use of tongs to hold the hot steel. You'll use the vise and a twisting wrench for the handle, and practice tapering and turning scrolls as well.  In forging the blade, you'll learn about full-face and half-face hammer blows.  Finally, you can apply a hot wax finish to protect your letter opener. The class runs from 4 pm to 10 pm with a break for dinner. Instructor: Amanda Kazarian
  • October 09, 2021

    Iron Age Knife

    $175.00
    Prerequisite: Any Discovery Class or Letter Opener class Date: October 9, 2021 Time: 9 AM - 3 PM Location: Adam's Forge In this class, Adam’s Forge instructor Kent Lulewich will help equip you for a Viking adventure by teaching you to make a small iron age knife.  Not only is this an attractive tool, it’s also a pleasure to make, especially for those with little blacksmithing experience.  One of the advantages of this design is that it’s a one-piece knife; you don’t have the extra work of creating and attaching a handle. This enables you to bring home a beautiful and functional finished product. In this class, you’ll practice moving metal to specific dimensions, tapering and turning the beautifully curved handle.  You’ll also gain experience in learning to hold awkward shapes while striking them.  Hint: using the right tongs helps!
  • October 03, 2021

    Iron Age Cutlery

    $175.00
    Date: October 3, 2021 Time: 9 AM - 3 PM Location: Adam's Forge Instructor: Leif Bennett Students should have the experience or motivation to deal with the challenge of moving metal to very specific dimension, as well at the challenge of holding difficult shapes while striking them.  Today we will make a small (about 4 inches total length) knife and "fork" no person in the Iron Age would want to be without. This is this perfect first knife for those with little blacksmithing experience and also a great project for those with more experience.  We will be making the knife of mild steel yet hardening it in a secret Viking way which will allow for a razor edge. Once the knife is done we move on to that essential eating tool – the one pronged Spisepind. Together, you will have a cutlery set the envy of all your fellow Norsemen and Norsewomen! Prerequisite: Discovery class or Letter Opener class This class runs from 9:00 AM to 3:00PM with a break for lunch.

Go to Top