- Sorry, this product cannot be purchased.
December 10, 2023
Steel Rose
Prerequisite: Discovery Class Date: December 10, 2023 Time: 2 PM - 8 PM Location: Adam's Forge In this fun workshop students will forge a rose from steel sheet and attach it to a forged stem under the guidance of Adam's Forge instructor Amanda Kazarian. Amanda will be teaching a whole set of new skills including sheet work, forging, forming and texturing the petals. Students will finish the day with a lovely rose that never wilts! Keep it for yourself or give it to a special person. The prerequisite for this class is any Discovery class. A little more time with a hammer is useful but not required. This workshop will run from 9:00 am - 3:00 pm, with a one hour break for lunch. The fee for this class includes 1 rose blank, additional blanks are available for purchase. Please note: All classes are released for member-only early registration for one week before they're available for general registration. If you're unable to add this class to your cart, you can wait for general release or join our membership program at any time!November 29, 2023
Discovery Letter Opener
Prerequisite: None. This is an introductory workshop Date: November 29, 2023 Time: 6 PM - 10 PM Location: Adam's Forge The Letter Opener is a Discovery workshop as well as a prerequisite for all of our blade workshops. This workshop introduces techniques that are useful in a wide range of blacksmithing projects. You'll learn how to work with slightly larger stock, and be introduced to the proper choice and use of tongs to hold the hot steel. You'll use the vise and a twisting wrench for the handle, and practice tapering and turning scrolls as well. In forging the blade, you'll learn about full-face and half-face hammer blows. Finally, you can apply a hot wax finish to protect your letter opener. Please note: All workshops are released for member-only early registration for one week before they're available for general registration. If you're unable to add this to your cart, you can wait for general release or join our membership program at any time!December 03, 2023
Discovery Letter Opener
Prerequisite: None. This is an introductory workshop Date: December 3, 2023 Time: 9 AM - 1 PM Location: Adam's Forge The Letter Opener is a Discovery workshop as well as a prerequisite for all of our blade workshops. This workshop introduces techniques that are useful in a wide range of blacksmithing projects. You'll learn how to work with slightly larger stock, and be introduced to the proper choice and use of tongs to hold the hot steel. You'll use the vise and a twisting wrench for the handle, and practice tapering and turning scrolls as well. In forging the blade, you'll learn about full-face and half-face hammer blows. Finally, you can apply a hot wax finish to protect your letter opener. Please note: All workshops are released for member-only early registration for one week before they're available for general registration. If you're unable to add this to your cart, you can wait for general release or join our membership program at any time!December 14, 2023
Discovery BBQ Tool Class
Prerequisite: None. This is the first workshop to take. Date: December 14, 2023 Time: 6 PM - 10 PM Location: Adam's Forge Start Smithing! The Ancient DIY Craft. Not sure what blacksmithing is or if you’re really interested? This workshop is for you! Come watch a demonstration and then give it a try in the forge with the help of one of our intrepid instructors. The pre-industrial art of blacksmithing has existed since the ancient times - copper making at high-temperature dates as far back as 5,000 BCE! Projects are simple and will give you a taste of what hot forging is about. In this 4 hour class you'll get an introduction to our forge and tools, learn how to work safely, and learn the fundamental techniques of blacksmithing. And you'll come home with a useful barbecue tool that you forged on your own! Come discover blacksmithing for yourself! SAFETY NOTES: The minimum age to register for this class is 12 years old. All students between the ages of 12 and 17 must be accompanied by a parent or guardian while at the Forge. HYDRATION: If you’re not sweating you’re probably not doing it right. Please bring something non-alcoholic to drink. Water works perfectly! PROTECTIVE CLOTHING (COTTON, WOOL, or LEATHER): Nonflammable material is REQUIRED at all times. Tee shirts and jeans are perfect. FOOTWEAR (LEATHER, COTTON): Nonflammable and with the toes covered to protect the feet from the constant production of hot and sharp metal fragments which rain down on the feet constantly is REQUIRED at all times. A steel toe is optional and provides protection against a dropped hammer or work piece. Boots, with the pants outside the boot top will prevent the hot and sharp metal fragments from getting in and burning your feet. Tools and equipment are provided without extra charge. Eye protection is mandatory. Please bring your own safety glasses, or we can provide a new unused pair at no additional cost. Gloves are optional. We recommend that you bring a pair in case you have trouble getting hot pieces in and out of the forge. If you decide you need a pair on the day of your class you can purchase them from Adam's Forge for $7.00. Please note: All classes are released for member-only early registration for one week before they're available for general registration. If you're unable to add this class to your cart, you can wait for general release or join our membership program at any time!December 17, 2023
Paring Knife
Date: December 17, 2023 Time: 9 AM - 3 PM Location: Adam's Forge Instructor: Kent Lulewich Prerequisite: Letter Opener Discovery WorkshopJoin us to create a paring knife to use in the kitchen or take on your next picnic. This is a high carbon steel knife made from 80CRV2 steel.
We start by creating the handle section that you can size to fit your hand perfectly. Then the blade is forged and heat-treated. Lastly, we will grind it to the level of sharpness you desire.
The handle will be cord wrapped for both comfort and durability. We will discuss other handle options you can try on your own.
While we will not have time in this class to make a sheath, we will show you examples so you can do this on your own.
You will leave with a complete knife, ready to use.
Tools: Students do not need to bring tools; we have everything that you will need. However, if you happen to have the following, please bring them so that you have the opportunity to use your own!
Coarse files (i.e. 12 inch Heavy Duty Set from Harbor Freight)
Tongs for ¼” x ¾” stock
Class runs from 9am - 3pm with a one hour meal break. Please note: All workshops are released for member-only early registration for one week before they're available for general registration. If you're unable to add this class to your cart, you can wait for general release or join our membership program at any time!December 16, 2023 - December 17, 2023
Turk’s Head Marlinspike
When: December 16, 2023: 4:00pm-8:00pm
December 17, 2023: 10:00am-2:00pm
Where: Adam’s Forge
Prerequisite: None. This is an introductory class.
Note: This class takes place over two consecutive days. Students must attend both days.
A Marlinspike is a tapered iron spike that was used by sailors of old to do just about every manner of work on the ship’s rigging. Come to Adam’s Forge to learn how to make your own and learn some marlinspike seamanship as well!
This class is perfect for anyone interested in learning how to forge a tool of their own the way they would have made it back during the age of sail! On day one we will forge our own marlinspikes with Lead instructor, Dossain Valencia of Adam’s Forge and prep them for day two with our guest instructor Marc Casebolt. With Marc you’ll learn how to put in a Turks head knot on your marlinspike to not only create the handle but also put in a decorative covering knot to show off your knotwork prowess. These two skills combined can translate into a number of other projects; think hardware, knife handles, handles on other tools, even sculpture.
After your two days here you’ll be able to set foot on any sea vessel with your newly forged marlinspike worthy of its salt. Show your friends, show your crewmates!
Marc has been tying decorative knots since he was about 12 years old. After finding the Ashley Book Of Knots on his father’s bookshelf, he was hooked on the beauty and symmetry of what is called Marlinspike seamanship, which is the term for all knot work developed and used by the old time sailors. Marc is now a retired engineer and has the time to devote much more effort to the craft. Much of his recent work is now on display at the Channel Island Maritime Museum in Oxnard Ca, where he has been a volunteer for over 7 years. He now teaches knot tying to anyone who will sit still, listen, and give it a try!
Please note: All classes are released for member-only early registration for one week before they're available for general registration. If you're unable to add this class to your cart, you can wait for general release or join our membership program at any time!December 17, 2023
Discovery Magic Wands Class
Prerequisite: None. This is an introductory class. Date. December 17, 2023 Time: 4 PM - 8 PM Location: Adam's Forge Could you use more magic in your life? If so, this is the workshop for you! This super fun workshop is a great introduction to the forge and is suitable for more advanced students as well. In this workshop, students will be guided in forging their own magic wands from a 3/8" square bar. The instructor will demonstrate various design options, including different styles of twists and surface textures. And they'll assist students as they create their own magic. Once the wands are made, The instructor will show students how to add an optional magic orb (otherwise known as a marble) to the top of the wand for extra special power. Finally, they will go over finishing options. All materials will be provided. Please note: All workshops are released for member-only early registration for one week before they're available for general registration. If you're unable to add this class to your cart, you can wait for general release or join our membership program at any time!December 21, 2023
Discovery Letter Opener
Prerequisite: None. This is an introductory workshop Date: December 21, 2023 Time: 2 PM - 6 PM Location: Adam's Forge The Letter Opener is a Discovery workshop as well as a prerequisite for all of our blade workshops. This workshop introduces techniques that are useful in a wide range of blacksmithing projects. You'll learn how to work with slightly larger stock, and be introduced to the proper choice and use of tongs to hold the hot steel. You'll use the vise and a twisting wrench for the handle, and practice tapering and turning scrolls as well. In forging the blade, you'll learn about full-face and half-face hammer blows. Finally, you can apply a hot wax finish to protect your letter opener. Please note: All workshops are released for member-only early registration for one week before they're available for general registration. If you're unable to add this to your cart, you can wait for general release or join our membership program at any time!December 23, 2023
Penannular Pin
Prerequisite: Any Discovery Class Date: December 23, 2023 Time: 9 AM - 3 PM Location: Adam's Forge Having trouble keeping your superhero cape fastened? This class is for you! The penannular has been made for millennia in many cultures to fasten clothing. The Vikings made them, the Celts popularized them. This workshop is a perfect next step after Discovery Class. We'll teach you how to make a basic pin and suggest some design variations. The techniques used in making penannulars can be applied to many advanced projects. Come learn in the fun class! ps: Penannulars make great gifts! Skills learned: Tapers, twisting, bending over the horn, and finishing. This class runs from 9 AM- 3 PM with an hour meal break. Please note: All workshops are released for member-only early registration for one week before they're available for general registration. If you're unable to add this to your cart, you can wait for general release or join our membership program at any time!December 23, 2023
Discovery Letter Opener
Prerequisite: None. This is an introductory workshop Date: December 23, 2023 Time: 4 PM - 8 PM Location: Adam's Forge The Letter Opener is a Discovery workshop as well as a prerequisite for all of our blade workshops. This workshop introduces techniques that are useful in a wide range of blacksmithing projects. You'll learn how to work with slightly larger stock, and be introduced to the proper choice and use of tongs to hold the hot steel. You'll use the vise and a twisting wrench for the handle, and practice tapering and turning scrolls as well. In forging the blade, you'll learn about full-face and half-face hammer blows. Finally, you can apply a hot wax finish to protect your letter opener. Please note: All workshops are released for member-only early registration for one week before they're available for general registration. If you're unable to add this to your cart, you can wait for general release or join our membership program at any time!December 07, 2023
Discovery Chopsticks Workshop
Date: December 7, 2023 Time: 6 PM - 10 PM Location: Adam's Forge Here's our newest Discovery workshop and also one for those more experienced students who want to build on their skills. While this project is a simple one, it’s also one that invites improvisation and experimentation. Using 1/4” mild steel bar, our instructor will demonstrate tapering the stock while checking as you go to create a tool that balances in your hand while in use. They’ll show several different design options, from various twists to different punches you can use for texture as well as different types of finials. Then you’ll move on to the little chopstick rests. Here, you can really let your imagination lead the way! From traditionally simple and elegant shapes to wild and whacky and everything in between, you’ll be free to create your own custom set, or maybe more if you’re swift. These also make great hair pins and gifts too! Prerequisite: None. This is an introductory workshop. It's suitable for beginners as well as more experienced smiths. Please note: All classes are released for member-only early registration for one week before they're available for general registration. If you're unable to add this class to your cart, you can wait for general release or join our membership program at any time!December 09, 2023
Fire Poker
Prerequisite: Any Discovery Class Date: December 9, 2023 Time: 9 AM - 3 PM Location: Adam's Forge This is a CBA Level I class Are you interested in building your repertoire of fundamental blacksmithing skills and techniques? Then, this workshop is for you! In this workshop, students will learn to forge a fire poker. Trust us when we say that it's a pretty rad addition to your project line-up. Perfect for camping or if you have a fireplace or backyard fire-pit at home! The fire poker project class is specifically designed to introduce students to two fundamental blacksmithing techniques - forge welding and forging to dimension. Students will learn how to forge weld to create the poker end of the fire poker. Forge welding is the process of welding two pieces of metal together using heat and hammer and is an essential technique for when you need to join metal pieces together. It is a tricky process and our instructor will lead you through the process step-by-step to be able to successfully replicate the process on your own. In addition, students will learn to forge the handle of the fire poker to dimension. This is another essential skill and we'll teach you the tips and tricks necessary to be successful. This workshop is most appropriate for the advancing smith with an interest in building skills and technique. While it is not required, we have found that students who have taken at least 3-5 project classes with us before starting this project are more successful and get more out of this class. All students must have taken a Discovery class with us. The workshop runs from 9 am to 3 pm with a break for lunch. Instructor: Leif Bennett Please note: All workshops are released for member-only early registration for one week before they're available for general registration. If you're unable to add this to your cart, you can wait for general release or join our membership program at any time!
Adam’s Forge is supported, in part, by the Los Angeles County Board of Supervisors through the Los Angeles County Department of Arts and Culture.
