• Prerequisite: None. This is an introductory workshop Suggested skill level: Beginner and up Date: May 18, 2024 Time: 2 PM - 6 PM Location: Adam's Forge Not just a useful tool, but also the first step to all of your bladesmithing dreams, our Letter Opener is a Discovery workshop as well as a prerequisite for all of our blade workshops. The Letter Opener workshop is perfect as either an introductory or a follow-up course, as it introduces techniques that are useful in a wide range of blacksmithing projects. You’ll learn how to work with slightly larger stock, and be introduced to the proper choice and use of tongs to hold the hot steel. You’ll use the vise and a twisting wrench for the handle, and practice tapering and turning scrolls as well.  In forging the blade, you’ll learn about full-face and half-face hammer blows.  Finally, you can apply a hot wax finish to protect your letter opener. Don’t be afraid if that sounds like a lot; we’ll be there every step of the way to make sure you master all the skills you need.  

       
  • May 11, 2024

    Discovery Letter Opener

    $175.00
    Prerequisite: None. This is an introductory workshop Suggested skill level: Beginner and up Date: May 11, 2024 Time: 12 PM - 4 PM Location: Adam's Forge Not just a useful tool, but also the first step to all of your bladesmithing dreams, our Letter Opener is a Discovery workshop as well as a prerequisite for all of our blade workshops. The Letter Opener workshop is perfect as either an introductory or a follow-up course, as it introduces techniques that are useful in a wide range of blacksmithing projects. You’ll learn how to work with slightly larger stock, and be introduced to the proper choice and use of tongs to hold the hot steel. You’ll use the vise and a twisting wrench for the handle, and practice tapering and turning scrolls as well.  In forging the blade, you’ll learn about full-face and half-face hammer blows.  Finally, you can apply a hot wax finish to protect your letter opener. Don’t be afraid if that sounds like a lot; we’ll be there every step of the way to make sure you master all the skills you need. Please note: the first week that registration for this workshop is open, spots may only be purchased by members. If you find you are unable to register, please check back after that first week has passed, or consider becoming a member of Adam’s Forge. All proceeds go towards supporting our amazing organization, and membership will bring you exclusive events and opportunities, along with a community of other blacksmiths!

       
  • May 05, 2024

    Iron Age Knife

    $190.00
    Prerequisite: Any Discovery Class or Letter Opener class Suggested skill level: Beginner and up Date: May 5, 2024 Time: 9 AM - 3 PM Location: Adam's Forge Instructor: Dossain Valencia In this workshop, Adam’s Forge instructor Dossain Valencia will help equip you for a Viking adventure by teaching you to make a small iron age knife.  Not only is this an attractive tool, it’s also a pleasure to make, especially for those with little blacksmithing experience.  One of the advantages of this design is that it’s a one-piece knife; you don’t have the extra work of creating and attaching a handle. This enables you to bring home a beautiful and functional finished product. In this workshop, you’ll practice moving metal to specific dimensions, tapering and turning the beautifully curved handle.  You’ll also gain experience in learning to hold awkward shapes while striking them.  Hint: using the right tongs helps! Please note: All workshops are released for member-only early registration for one week before they're available for general registration.  If you're unable to add this class to your cart, you can wait for general release or join our membership program at any time!
  • May 19, 2024

    Discovery Letter Opener

    $175.00
    Prerequisite: None. This is an introductory workshop Suggested skill level: Beginner and up Date: May 19, 2024 Time: 5 PM - 9 PM Location: Adam's Forge Not just a useful tool, but also the first step to all of your bladesmithing dreams, our Letter Opener is a Discovery workshop as well as a prerequisite for all of our blade workshops. The Letter Opener workshop is perfect as either an introductory or a follow-up course, as it introduces techniques that are useful in a wide range of blacksmithing projects. You’ll learn how to work with slightly larger stock, and be introduced to the proper choice and use of tongs to hold the hot steel. You’ll use the vise and a twisting wrench for the handle, and practice tapering and turning scrolls as well.  In forging the blade, you’ll learn about full-face and half-face hammer blows.  Finally, you can apply a hot wax finish to protect your letter opener. Don’t be afraid if that sounds like a lot; we’ll be there every step of the way to make sure you master all the skills you need. Please note: the first week that registration for this workshop is open, spots may only be purchased by members. If you find you are unable to register, please check back after that first week has passed, or consider becoming a member of Adam’s Forge. All proceeds go towards supporting our amazing organization, and membership will bring you exclusive events and opportunities, along with a community of other blacksmiths!

       
  • Date: May 12, 2024 Time: 9 AM - 3 PM Location: Adam's Forge

    Instructor: Gary Standke

    Prerequisite: Discovery Letter Opener, Power Hammer Safety,  plus one or two project classes. Participants should have solid blacksmithing skills and be confident using hand tools before moving to the power hammer.

    Skill Level: Seasoned beginner, Intermediate and Advanced

    Join us to create a blacksmith knife with the assistance of the power hammer.  This is a high carbon steel knife made from 80CRV2 steel.  This is your chance to safely use the power hammers. The drawing out of the handle of this knife takes about 30 minutes of heavy hitting with a hammer on the anvil. With the power hammer, it's done in a few minutes with little physical exertion on your part.

    We start this class by reviewing how to use the power hammer in a safe and effective manner.  While it can rapidly move metal with little effort on your part, it can also crush your project into a pretzel just as quickly.

    Then it's time to start the knife by drawing out the steel on the power hammer creating the handle.  The 4-inch blade section is then forged on the anvil; the power hammer will not help us here. Getting the correct taper and choosing your knife’s point will be discussed and demonstrated.  Once all is forged and rough ground, hardening is done at the forge: heating the blade to the correct temperature and quenching in oil to harden the edge. Tempering the blade to improve the toughness comes next using an oven.  Then to the powered grinders to grind, polish, and hone the edge to your chosen sharpness.

    While we will not have time in this class to make a sheath, we’ll be following up with leather sheath workshops in the very near future, so keep your eyes open for that.  You will leave with a complete knife, ready to use.

    Tools: Students do not need to bring tools; we have everything that you will need. However, if you happen to have the following, please bring them so that you have the opportunity to use your own!

    Coarse files (i.e. 12-inch Heavy Duty Set from Harbor Freight)

    Tongs for ¼” x ¾” stock

    Class starts at 9 am and runs to 3 pm with an hour for lunch break.

    Please note: All classes are released for member-only early registration for one week before they're available for general registration.  If you're unable to add this class to your cart, you can wait for general release or join our membership program at any time!
  • May 19, 2024

    Paring Knife

    $210.00
    Date: May 19, 2024 Time: 9 AM - 4 PM Location: Adam's Forge Instructor: Kent Lulewich Prerequisite: Letter Opener Discovery Class Suggested Skill Level: Beginner and up

    Join us to create a paring knife to use in the kitchen or take on your next picnic.   This is a high carbon steel knife made from 80CRV2 steel.

    We start by creating the handle section that you can size to fit your hand perfectly. Then the blade is forged and heat-treated. Lastly, we will grind it to the level of sharpness you desire.

    The handle will be cord wrapped for both comfort and durability. We will discuss other handle options you can try on your own.

    While we will not have time in this class to make a sheath, we will show you examples so you can do this on your own.

    You will leave with a complete knife, ready to use.

    Tools: Students do not need to bring tools; we have everything that you will need. However, if you happen to have the following, please bring them so that you have the opportunity to use your own!

    Coarse files (i.e. 12 inch Heavy Duty Set from Harbor Freight)

    Tongs for ¼” x ¾” stock

    Class runs from 9am - 3pm with a one hour meal break. Please note: All classes are released for member-only early registration for one week before they're available for general registration.  If you're unable to add this class to your cart, you can wait for general release or join our membership program at any time!
  • May 25, 2024

    Discovery Bottle Opener

    $175.00
    Prerequisite: None. This is an introductory class Suggested Skill Level: Beginner and up Date: May 25, 2024 Time: 6 PM - 10 PM Location: Adam's Forge Be the envy of all at your next social gathering, while you crack open everyone’s beverages with your new handy-dandy bottle opener, made by your own two hands! The Bottle Opener workshop is perfect as either an introductory or a follow-up course, as it introduces techniques that are useful in a wide range of blacksmithing projects.  You’ll learn how to work with slightly larger stock, and be introduced to the proper choice and use of tongs to hold the hot steel. You’ll use the vise and a twisting wrench for the handle, and practice tapering and turning scrolls as well.  In forging the handle, you’ll learn about shaping a square rod into an octagon, or if you prefer, a round, tapered bar.  Finally, you can apply a hot wax finish to protect your bottle opener. Don’t worry if that sounds intimidating, we promise that anyone can do it. Please note: the first week that registration for this workshop is open, spots may only be purchased by members. If you find you are unable to register, please check back after that first week has passed, or consider becoming a member of Adam’s Forge. All proceeds go towards supporting our amazing organization, and membership will bring you exclusive events and opportunities, along with a community of other blacksmiths!

         
  • May 26, 2024

    Layered Pendant

    $190.00
    Prerequisite: None. This is an introductory workshop Suggested skill level: Beginner and up Date: May 26, 2024 Time: 10 AM - 4 PM including an hour lunch break Location: Adam's Forge
    Adam’s Forge is delighted to partner with Metal Artist Chloe Kono aka Chloeography in offering a jewelry making workshop.  Chloe holds a Bachelor of Fine Arts degree from California State University Long Beach and has been creating metal art for over a decade.  Her aesthetic ranges from clever, humorous, and whimsical, to luminous heirloom pieces.
    In this workshop, you’ll design and create a layered pendant with simple sheet metal fabrication! Students will learn about the basic jewelry making hand tools, the nature of non-ferrous metals, and foundational techniques including sawing, texturing, riveting, and finishing.
    If you have a design that you’d like to make, it should be approximately between 1 and 2 inches overall.  Chloe will have designs on hand for you to try, or you can improvise on the day!
    Class fee includes raw materials and access to all tools and equipment needed to finish the project.
    Optional: Sterling Silver Sheet (3x3, 22g) is available for purchase if students would like an upgrade.
    Please note: the first week that registration for this workshop is open, spots may only be purchased by members. If you find you are unable to register, please check back after that first week has passed, or consider becoming a member of Adam’s Forge. All proceeds go towards supporting our amazing organization, and membership will bring you exclusive events and opportunities, along with a community of other blacksmiths!

       
  • Prerequisite: None. This is an introductory workshop Suggested skill level: Beginner and up Date: May 12, 2024 Time: 10 AM - 2 PM Location: Adam's Forge

    This is a good introductory project class for anyone interested in trying some chainmail, jewelry, or just plain crafting fun-seekers. Learn about jump rings, small pliers and get started by getting the hang of a Byzantine (or square) pattern chain. The goal is to make a bracelet, but this can be used in other ways as well. A wonderful gift for Mom would be to take this class together. Or craft her a present with the hands she loves.

    All tools and materials will be provided.

    Please note: the first week that registration for this workshop is open, spots may only be purchased by members. If you find you are unable to register, please check back after that first week has passed, or consider becoming a member of Adam’s Forge. All proceeds go towards supporting our amazing organization, and membership will bring you exclusive events and opportunities, along with a community of other blacksmiths!

       
  • Prerequisite: None.  This is an introductory class. Suggested Skill Level: Beginner and up Date. May 2, 2024 Time: 6 PM -  10 PM Location: Adam's Forge Forging Friends Special! Buy two and save $36! use this coupon code: CFZDXC47 Could you use more magic in your life?  If so, this is the workshop for you! Commercially mass-produced wands made of wood or resin will break with use, but a hand-forged wand will last forever. This super fun workshop is a great introduction to the forge and is suitable for more advanced students as well. Here, you will be guided in forging your own magic wand from a 3/8″ square bar. The instructor will demonstrate various design options, including different styles of twists and surface textures, and they’ll assist you as you create your own magic. Once your wand is made, your instructor will show you how to add an optional magical orb (otherwise known as a marble) to the top of the wand for extra special power. Finally, they will go over finishing options. Please note: the first week that registration for this workshop is open, spots may only be purchased by members. If you find you are unable to register, please check back after that first week has passed, or consider becoming a member of Adam’s Forge. All proceeds go towards supporting our amazing organization, and membership will bring you exclusive events and opportunities, along with a community of other blacksmiths!  
  • Date: May 22, 2024 Time: 6 PM - 10 PM Location: Adam's Forge Instructor: Amanda Kazarian Forging Friends Special! Buy two and save $36! use this coupon code: 6PSHK4RB This class is a great follow-up to a Discovery class.  Here,  you’ll use some basic forging techniques to sculpt something both creative and useful.  Using bar stock, a rounding hammer and the horn of the anvil, you’ll shape the graceful curves that make this tool a pleasure to hold.  With some of our hand forged custom punches, you’ll give your creature of the deep character and features to make it unique. Skills used in this project include: Tapering Forging on the horn of the anvil to create curves and chamfers, making it ergonomic Hot punching with several different punches Forming the opener end around a mandrel This is a good class for beginners and makes a great present! Prerequisite: any Discovery class. Please note: All classes are released for member-only early registration for one week before they're available for general registration.  If you're unable to add this class to your cart, you can wait for general release or join our membership program at any time!
  • Date: May 30, 2024 Time: 6 PM - 10 PM Location: Adam's Forge Prerequisites: None; this is an introductory workshop Forging Friends Special! Buy two and save $36! use this coupon code: QHHU8WEG Our newest Discovery workshop is perfect for beginners and more experienced students alike. The project is simple, but leaves so much space for improvisation and creativity. If you want to see what you can really do, this is the workshop for you! Using 1/4” mild steel bar, our instructor will demonstrate tapering the stock to create a tool that balances neatly in your hand while in use. They’ll show you several different design options, from various twists to different punches you can use for texture as well as different types of finials.  Then you’ll move on to the little chopstick rests.  Here, you can really let your imagination lead the way!  From traditionally simple and elegant shapes to wild and wacky and everything in between, you’ll be free to create your own custom set, or maybe more if you’re swift. These also make great hair sticks, perfect for your own use, or if there is a certain long-haired person in your life you wish to impress. Please note: the first week that registration for this workshop is open, spots may only be purchased by members. If you find you are unable to register, please check back after that first week has passed, or consider becoming a member of Adam’s Forge. All proceeds go towards supporting our amazing organization, and membership will bring you exclusive events and opportunities, along with a community of other blacksmiths!

Title

Go to Top