• February 08, 2023 - February 11, 2023

    Hunter Knife with Nick Rossi

    $875.00
    Date: February 8, 9, 10 & 11 Time: 10 AM - 6 PM and 9 AM - 5 PM Location: Adam's Forge Please note: This class takes place over four sessions, from Tuesday through Saturday. Session 1: 2-8-23 from 10:00am - 6:00pm Session 2: 2-9-23 from 10:00am - 6:00pm Session 3: 2-10-23 from 10:00am - 6:00pm Session 4: 2-11-23 from 9:00am - 5:00pm Students must attend all sessions.  Classes last for 8 hours with an hour meal break. Please note: All classes are released for member-only early registration for one week before they're available for general registration.  If you're unable to add this class to your cart, you can wait for general release or join our membership program at any time!

    All the way from Maine, Adam’s Forge is proud to host Nicholas Rossi M.S and offer our students the exciting opportunity to take a four-day Hunting Knife course.

    Don't miss your chance to take a class of a lifetime with Nick Rossi as you forge a hunting knife with a hot-fitted bolster. Valuable instruction on blade forging, grinding, heat treating, tempering, handle fit up, as well as all sorts of neat tips and tricks from an accredited ABS Master Bladesmith will be covered. Forging to the final dimension will be stressed as well as hammer control to elevate the student’s skill at the anvil and ensure that they get the most out of each hammer blow. This is your chance to learn from an experienced knifemaker from New England who has been teaching bladesmithing for almost two decades and carries with him a serious passion for not only bladesmithing, but blacksmithing as well.

    Nick’s interest in metalworking began with a boyhood fascination with knives and swords. At the age of 15 he started working at one of the state of Maine’s largest cutlery shops and was introduced to the world of custom knifemaking by local craftspeople. With the combination of books, advice and seminars, Nick developed his skills as a bladesmith and began selling his work under the “Rossi Knives” name. Nick’s work is most influenced by Japanese, Southeast Asian and Scandinavian design as well as literature, fine art and nature. Nick is a certified  Master Bladesmith in the American Bladesmith Society, a member of the Maine Craft Guild, the Maine Craft Association, the Portland based Metals Collective and a member of the New England Bladesmith Guild. Nick teaches workshops and gives demonstrations all over the country.

    Students can expect to leave the class with a unique handmade hunting knife.

    Prerequisites: Letter Opener Discovery plus Introduction to Bladesmithing or 2-3 of our bladesmithing classes.  Exceptions to the prerequisites are subject to administrative approval.

  • February 18, 2023

    Iron Age Cutlery

    $190.00
    Date: February 18, 2023 Time: 9 AM - 3 PM Location: Adam's Forge Instructor: Leif Bennett Students should have the experience or motivation to deal with the challenge of moving metal to very specific dimension, as well at the challenge of holding difficult shapes while striking them.  Today we will make a small (about 4 inches total length) knife and "fork" no person in the Iron Age would want to be without. This is this perfect first knife for those with little blacksmithing experience and also a great project for those with more experience.  We will be making the knife of mild steel yet hardening it in a secret Viking way which will allow for a razor edge. Once the knife is done we move on to that essential eating tool – the one pronged Spisepind. Together, you will have a cutlery set the envy of all your fellow Norsemen and Norsewomen! Prerequisite: Discovery Letter Opener class This class runs from 9:00 AM to 3:00 PM with a break for lunch. Please note: All classes are released for member-only early registration for one week before they're available for general registration.  If you're unable to add this class to your cart, you can wait for general release or join our membership program at any time!
  • March 25, 2023

    Iron Age Knife

    $190.00
    Prerequisite: Any Discovery Class or Letter Opener class Date: March 25, 2023 Time: 9 AM - 3 PM Location: Adam's Forge In this class, Adam’s Forge instructor Kent Lulewich will help equip you for a Viking adventure by teaching you to make a small iron age knife.  Not only is this an attractive tool, it’s also a pleasure to make, especially for those with little blacksmithing experience.  One of the advantages of this design is that it’s a one-piece knife; you don’t have the extra work of creating and attaching a handle. This enables you to bring home a beautiful and functional finished product. In this class, you’ll practice moving metal to specific dimensions, tapering and turning the beautifully curved handle.  You’ll also gain experience in learning to hold awkward shapes while striking them.  Hint: using the right tongs helps! Please note: All classes are released for member-only early registration for one week before they're available for general registration.  If you're unable to add this class to your cart, you can wait for general release or join our membership program at any time!
  • March 05, 2023

    Kiridashi

    $200.00
    Date: March 5, 2023 Time: 2 PM - 9 PM Location: Adam's Forge Instructor: Dossain Valencia

    The Kiridashi is the original Japanese utility knife that has historically been used by Samurai and peasants alike.  It’s both light and strong, suitable for a variety of uses.  If you’ve taken the Letter Opener Discovery class, this is a perfect follow up project to build your bladesmithing skills.

    Here, you’ll practice precision forging, learn some of the important considerations in blade design and have a chance to try different texturing methods.  This blade is made from tool steel, so you’ll be heat treating, grinding, polishing and hand sharpening as well.

    Prerequisite: Letter Opener Discovery Class

    This class runs from 2:00pm – 9:00pm with an hour meal break.

    Please note: All classes are released for member-only early registration for one week before they're available for general registration.  If you're unable to add this class to your cart, you can wait for general release or join our membership program at any time!

  • Prerequisite: None. This is an introductory class Date: August 31, 2022 Time: 10 AM - 2 PM Location: Adam's Forge The Letter Opener is an introductory class as well as a great next step for students that have taken our Discovery class and want to continue to develop their blacksmithing skills. The Letter Opener class teaches techniques that are useful in a wide range of blacksmithing projects.  You'll learn how to work with slightly larger stock, and be introduced to the proper choice and use of tongs to hold the hot steel. You'll use the vise and a twisting wrench for the handle, and practice tapering and turning scrolls as well.  In forging the blade, you'll learn about full-face and half-face hammer blows.  Finally, you can apply a hot wax finish to protect your letter opener.  
  • February 21, 2023

    Open Forge

    $55.00
    Prerequisite: Any Discovery Class and Adam's Forge Membership  Can't add this class to your cart? You can join the Membership Program here   Date: February 21, 2023 Time: 6 pm - 10 pm Location: Adam's Forge Not a class, but a swell time to get in the forge to do what you wanna do. You can bring your own material and work on your own project. This can be a chance to finish that piece you started or work out a technique you’ve been meaning to try. One of our intrepid instructors will be on hand working on their own thing. Please note: these sessions are intended to support our students as they practice skills that are within their ability range.  Please do not use our forge and tools to experiment with new techniques that are beyond your skill level.  When in doubt, ask the instructor. As with all of our classes, we require that students attending Open Forge sessions be at least 12 years old. A student who is not an adult (18 and older) will need to have a parent or guardian present at ALL times during the session. Thanks for thinking of safety first. Bring your own steel OR we have steel for sale at the forge: 1/4" square 3/8" square and round 1/2" square and round Sold by the foot sucker rod (higher carbon steel) sold in 7" sections You must have taken at least one Discovery class from us and be familiar with working safely.
  • February 26, 2023

    Open Forge

    $55.00
    Prerequisite: Any Discovery Class and Adam's Forge Membership  Can't add this class to your cart? You can join the Membership Program here   Date: February 26, 2023 Time: 4 pm - 8 pm Location: Adam's Forge Not a class, but a swell time to get in the forge to do what you wanna do. You can bring your own material and work on your own project. This can be a chance to finish that piece you started or work out a technique you’ve been meaning to try. One of our intrepid instructors will be on hand working on their own thing. Please note: these sessions are intended to support our students as they practice skills that are within their ability range.  Please do not use our forge and tools to experiment with new techniques that are beyond your skill level.  When in doubt, ask the instructor. As with all of our classes, we require that students attending Open Forge sessions be at least 12 years old. A student who is not an adult (18 and older) will need to have a parent or guardian present at ALL times during the session. Thanks for thinking of safety first. Bring your own steel OR we have steel for sale at the forge: 1/4" square 3/8" square and round 1/2" square and round Sold by the foot sucker rod (higher carbon steel) sold in 7" sections You must have taken at least one Discovery class from us and be familiar with working safely.
  • January 31, 2023

    Open Forge

    $55.00
    Prerequisite: Any Discovery Class and Adam's Forge Membership  Can't add this class to your cart? You can join the Membership Program here   Date: February 21, 2023 Time: 6 pm - 10 pm Location: Adam's Forge Not a class, but a swell time to get in the forge to do what you wanna do. You can bring your own material and work on your own project. This can be a chance to finish that piece you started or work out a technique you’ve been meaning to try. One of our intrepid instructors will be on hand working on their own thing. Please note: these sessions are intended to support our students as they practice skills that are within their ability range.  Please do not use our forge and tools to experiment with new techniques that are beyond your skill level.  When in doubt, ask the instructor. As with all of our classes, we require that students attending Open Forge sessions be at least 12 years old. A student who is not an adult (18 and older) will need to have a parent or guardian present at ALL times during the session. Thanks for thinking of safety first. Bring your own steel OR we have steel for sale at the forge: 1/4" square 3/8" square and round 1/2" square and round Sold by the foot sucker rod (higher carbon steel) sold in 7" sections You must have taken at least one Discovery class from us and be familiar with working safely.
  • March 07, 2023

    Open Forge

    $55.00
    Prerequisite: Any Discovery Class and Adam's Forge Membership  Can't add this class to your cart? You can join the Membership Program here   Date: March 7, 2023 Time: 6 pm - 10 pm Location: Adam's Forge Not a class, but a swell time to get in the forge to do what you wanna do. You can bring your own material and work on your own project. This can be a chance to finish that piece you started or work out a technique you’ve been meaning to try. One of our intrepid instructors will be on hand working on their own thing. Please note: these sessions are intended to support our students as they practice skills that are within their ability range.  Please do not use our forge and tools to experiment with new techniques that are beyond your skill level.  When in doubt, ask the instructor. As with all of our classes, we require that students attending Open Forge sessions be at least 12 years old. A student who is not an adult (18 and older) will need to have a parent or guardian present at ALL times during the session. Thanks for thinking of safety first. Bring your own steel OR we have steel for sale at the forge: 1/4" square 3/8" square and round 1/2" square and round Sold by the foot sucker rod (higher carbon steel) sold in 7" sections You must have taken at least one Discovery class from us and be familiar with working safely.
  • March 21, 2023

    Open Forge

    $55.00
    Prerequisite: Any Discovery Class and Adam's Forge Membership  Can't add this class to your cart? You can join the Membership Program here   Date: March 21, 2023 Time: 6 pm - 10 pm Location: Adam's Forge Not a class, but a swell time to get in the forge to do what you wanna do. You can bring your own material and work on your own project. This can be a chance to finish that piece you started or work out a technique you’ve been meaning to try. One of our intrepid instructors will be on hand working on their own thing. Please note: these sessions are intended to support our students as they practice skills that are within their ability range.  Please do not use our forge and tools to experiment with new techniques that are beyond your skill level.  When in doubt, ask the instructor. As with all of our classes, we require that students attending Open Forge sessions be at least 12 years old. A student who is not an adult (18 and older) will need to have a parent or guardian present at ALL times during the session. Thanks for thinking of safety first. Bring your own steel OR we have steel for sale at the forge: 1/4" square 3/8" square and round 1/2" square and round Sold by the foot sucker rod (higher carbon steel) sold in 7" sections You must have taken at least one Discovery class from us and be familiar with working safely.
  • February 25, 2023

    Paring Knife

    $190.00
    Date: February 25, 2023 Time: 9 AM - 3 PM Location: Adam's Forge Instructor: Kent Lulewich Prerequisite: Letter Opener Discovery Class

    Join us to create a paring knife to use in the kitchen or take on your next picnic.   This is a high carbon steel knife made from O1 steel.

    We start by creating the handle section that you can size to fit your hand perfectly. Then the blade is forged and heat-treated. Lastly, we will grind it to the level of sharpness you desire.

    The handle will be cord wrapped for both comfort and durability. We will discuss other handle options you can try on your own.

    While we will not have time in this class to make a sheath, we will show you examples so you can do this on your own.

    You will leave with a complete knife, ready to use.

    Tools: Students do not need to bring tools; we have everything that you will need. However, if you happen to have the following, please bring them so that you have the opportunity to use your own!

    Coarse files (i.e. 12 inch Heavy Duty Set from Harbor Freight)

    Tongs for ¼” x ¾” stock

    Class runs from 9am - 3pm with a one hour meal break. Please note: All classes are released for member-only early registration for one week before they're available for general registration.  If you're unable to add this class to your cart, you can wait for general release or join our membership program at any time!
  • Prerequisite: None. This is an introductory class Date: December 8, 2022 Time: 12 PM - 4 PM Location: Adam's Forge The Bottle Opener is an introductory class as well as a great next step for students that have taken our Discovery class and want to continue to develop their blacksmithing skills. This class teaches techniques that are useful in a wide range of blacksmithing projects.  You'll learn how to work with slightly larger stock, and be introduced to the proper choice and use of tongs to hold the hot steel. You'll use the vise and a twisting wrench for the handle, and practice tapering and turning scrolls as well.  In forging the handle, you'll learn about shaping a square rod into an octagon, or if you prefer, a round, tapered bar.  Finally, you can apply a hot wax finish to protect your bottle opener.      

Title

Go to Top