• March 02, 2024

    Open Forge

    $60.00
    Prerequisite: Any Discovery Class and Adam's Forge Membership  Please note: Beginning on January 1, 2024, all attendees of Open Forge sessions must have successfully passed the Forge Safety class, which is free to members and available for sign-up on the class calendar. Can't add this workshop to your cart? You can join the Membership Program here   Date: March 2, 2024 Time: 4 pm - 8 pm Location: Adam's Forge Not a class, but a swell time to get in the forge to do what you wanna do. You can bring your own material and work on your own project. This can be a chance to finish that piece you started or work out a technique you’ve been meaning to try. One of our intrepid instructors will be on hand for supervision and guidance, although these are not teaching workshops. Please note: these sessions are intended to support our students as they practice skills that are within their ability range.  Please do not use our forge and tools to experiment with new techniques that are beyond your skill level.  When in doubt, ask the instructor. As with all of our workshops, we require that students attending Open Forge sessions be at least 12 years old. A student who is not an adult (18 and older) will need to have a parent or guardian present at ALL times during the session. Thanks for thinking of safety first. Bring your own steel OR we have steel for sale at the forge: 1/4" square 3/8" square and round 1/2" square and round Sold by the foot sucker rod (higher carbon steel) sold in 7" sections You must have taken at least one Discovery class from us and be familiar with working safely.
  • March 12, 2024

    Forge Safety

    $125.00
    Prerequisite: Any Discovery Class  Please note, this class is required for all  Adam’s Forge members who wish to attend Open Forge sessions.    Date: March 12, 2024 Time: 6 pm - 10 pm Location: Adam's Forge

    This workshop is designed to introduce you to the best practices for safely using our shop equipment with an emphasis on power tools.  From the bandsaw, belt grinders, bench grinder & wire wheel to drill presses and how to safely shutdown the forges, our instructors will demonstrate proper use and guide you as you practice, learn, and finally demonstrate your ability to follow all the safety guidelines.

    Once you sign up, you’ll then take a series of online tests, which you must pass with a minimum of 85% prior to the start of your class.  Follow the online instructions to forward the test results to blacksmithclasses@gmail.com.  The on-site class is 4-hours in length and the class size is limited to 4 people.

    Please note: All workshops are released for member-only early registration for one week before they're available for general registration.  If you're unable to add this to your cart, you can wait for general release or join our membership program at any time!

  • March 29, 2024

    Forge Safety

    $125.00
    Prerequisite: Any Discovery Class  Please note, this class is required for all  Adam’s Forge members who wish to attend Open Forge sessions.    Date: March 29, 2024 Time: 6 pm - 10 pm Location: Adam's Forge

    This workshop is designed to introduce you to the best practices for safely using our shop equipment with an emphasis on power tools.  From the bandsaw, belt grinders, bench grinder & wire wheel to drill presses and how to safely shutdown the forges, our instructors will demonstrate proper use and guide you as you practice, learn, and finally demonstrate your ability to follow all the safety guidelines.

    Once you sign up, you’ll then take a series of online tests, which you must pass with a minimum of 85% prior to the start of your class.  Follow the online instructions to forward the test results to blacksmithclasses@gmail.com.  The on-site class is 4-hours in length and the class size is limited to 4 people.

    Please note: All workshops are released for member-only early registration for one week before they're available for general registration.  If you're unable to add this to your cart, you can wait for general release or join our membership program at any time!

  • Sale!

    March 17, 2024

    Discovery Letter Opener

    $157.50
    Prerequisite: None. This is an introductory workshop Suggested skill level: Beginner and up Date: March 17, 2024 Time: 10 AM - 2 PM Location: Adam's Forge Not just a useful tool, but also the first step to all of your bladesmithing dreams, our Letter Opener is a Discovery workshop as well as a prerequisite for all of our blade workshops. The Letter Opener workshop is perfect as either an introductory or a follow-up course, as it introduces techniques that are useful in a wide range of blacksmithing projects. You’ll learn how to work with slightly larger stock, and be introduced to the proper choice and use of tongs to hold the hot steel. You’ll use the vise and a twisting wrench for the handle, and practice tapering and turning scrolls as well.  In forging the blade, you’ll learn about full-face and half-face hammer blows.  Finally, you can apply a hot wax finish to protect your letter opener. Don’t be afraid if that sounds like a lot; we’ll be there every step of the way to make sure you master all the skills you need. Please note: the first week that registration for this workshop is open, spots may only be purchased by members. If you find you are unable to register, please check back after that first week has passed, or consider becoming a member of Adam’s Forge. All proceeds go towards supporting our amazing organization, and membership will bring you exclusive events and opportunities, along with a community of other blacksmiths!

       
  • March 09, 2024

    Discovery BBQ Tool

    $175.00
    Prerequisite: None. This is the first workshop to take. Suggested skill level: Beginner and up Date: March 9, 2024 Time: 4 PM  - 8 PM Location: Adam's Forge Are you a grill master? Do your weekends revolve around the smoking of various proteins? Do you live and breathe charcoal and fire? Then there’s one thing your rig needs: your very own, hand-made BBQ tool, forged in fire five times hotter than any grill. This workshop is perfect for beginners. Because you’re working with longer steel, you can mostly use your hands instead of tongs, which means you can focus on learning the basics of hammering and temperature control without having to also focus on manipulating the tongs. For more experienced blacksmiths, there’s lots of opportunity to experiment with different techniques. And best of all, you’ll go home with your very own, one-of-a-kind BBQ tool! Sound complicated? We promise it’s not. We’ll teach you everything you need to know. Please note: the first week that registration for this workshop is open, spots may only be purchased by members. If you find you are unable to register, please check back after that first week has passed, or consider becoming a member of Adam’s Forge. All proceeds go towards supporting our amazing organization, and membership will bring you exclusive events and opportunities, along with a community of other blacksmiths!

  • March 23, 2024

    Discovery Letter Opener

    $175.00
    Prerequisite: None. This is an introductory workshop Suggested skill level: Beginner and up Date: March 23, 2024 Time: 9 AM - 1 PM Location: Adam's Forge Not just a useful tool, but also the first step to all of your bladesmithing dreams, our Letter Opener is a Discovery workshop as well as a prerequisite for all of our blade workshops. The Letter Opener workshop is perfect as either an introductory or a follow-up course, as it introduces techniques that are useful in a wide range of blacksmithing projects. You’ll learn how to work with slightly larger stock, and be introduced to the proper choice and use of tongs to hold the hot steel. You’ll use the vise and a twisting wrench for the handle, and practice tapering and turning scrolls as well.  In forging the blade, you’ll learn about full-face and half-face hammer blows.  Finally, you can apply a hot wax finish to protect your letter opener. Don’t be afraid if that sounds like a lot; we’ll be there every step of the way to make sure you master all the skills you need. Please note: the first week that registration for this workshop is open, spots may only be purchased by members. If you find you are unable to register, please check back after that first week has passed, or consider becoming a member of Adam’s Forge. All proceeds go towards supporting our amazing organization, and membership will bring you exclusive events and opportunities, along with a community of other blacksmiths!

       
  • March 17, 2024

    Discovery Magic Wands

    $175.00
    Prerequisite: None.  This is an introductory class. Suggested Skill Level: Beginner and up Date. March 17, 2024 Time: 3 PM -  7 PM Location: Adam's Forge Could you use more magic in your life?  If so, this is the workshop for you! Commercially mass-produced wands made of wood or resin will break with use, but a hand-forged wand will last forever. This super fun workshop is a great introduction to the forge and is suitable for more advanced students as well. Here, you will be guided in forging your own magic wand from a 3/8″ square bar. The instructor will demonstrate various design options, including different styles of twists and surface textures, and they’ll assist you as you create your own magic. Once your wand is made, your instructor will show you how to add an optional magical orb (otherwise known as a marble) to the top of the wand for extra special power. Finally, they will go over finishing options. Please note: the first week that registration for this workshop is open, spots may only be purchased by members. If you find you are unable to register, please check back after that first week has passed, or consider becoming a member of Adam’s Forge. All proceeds go towards supporting our amazing organization, and membership will bring you exclusive events and opportunities, along with a community of other blacksmiths!  
  • March 03, 2024

    Discovery Letter Opener

    $175.00
    Prerequisite: None. This is an introductory workshop Suggested skill level: Beginner and up Date: March 3, 2024 Time: 2 PM - 6 PM Location: Adam's Forge Not just a useful tool, but also the first step to all of your bladesmithing dreams, our Letter Opener is a Discovery workshop as well as a prerequisite for all of our blade workshops. The Letter Opener workshop is perfect as either an introductory or a follow-up course, as it introduces techniques that are useful in a wide range of blacksmithing projects. You’ll learn how to work with slightly larger stock, and be introduced to the proper choice and use of tongs to hold the hot steel. You’ll use the vise and a twisting wrench for the handle, and practice tapering and turning scrolls as well.  In forging the blade, you’ll learn about full-face and half-face hammer blows.  Finally, you can apply a hot wax finish to protect your letter opener. Don’t be afraid if that sounds like a lot; we’ll be there every step of the way to make sure you master all the skills you need. Please note: the first week that registration for this workshop is open, spots may only be purchased by members. If you find you are unable to register, please check back after that first week has passed, or consider becoming a member of Adam’s Forge. All proceeds go towards supporting our amazing organization, and membership will bring you exclusive events and opportunities, along with a community of other blacksmiths!

       
  • March 24, 2024

    Discovery Chopsticks

    $175.00
    Date: March 24, 2024 Time: 9 AM - 1 PM Location: Adam's Forge Prerequisites: None; this is an introductory workshop Our newest Discovery workshop is perfect for beginners and more experienced students alike. The project is simple, but leaves so much space for improvisation and creativity. If you want to see what you can really do, this is the workshop for you! Using 1/4” mild steel bar, our instructor will demonstrate tapering the stock to create a tool that balances neatly in your hand while in use. They’ll show you several different design options, from various twists to different punches you can use for texture as well as different types of finials.  Then you’ll move on to the little chopstick rests.  Here, you can really let your imagination lead the way!  From traditionally simple and elegant shapes to wild and wacky and everything in between, you’ll be free to create your own custom set, or maybe more if you’re swift. These also make great hair sticks, perfect for your own use, or if there is a certain long-haired person in your life you wish to impress. Please note: the first week that registration for this workshop is open, spots may only be purchased by members. If you find you are unable to register, please check back after that first week has passed, or consider becoming a member of Adam’s Forge. All proceeds go towards supporting our amazing organization, and membership will bring you exclusive events and opportunities, along with a community of other blacksmiths!

  • Date: March 17, 2024 Time: 9 AM - 3 PM Location: Adam's Forge Prerequisite: None. This is an introductory workshop Skill Level: Beginner, Seasoned Beginner and Intermediate Class runs from 9am - 3pm with a one hour meal break.

    Is there anything classier than a well forged bowie knife with a handmade sheath to complete the look? We offer you a one-day leather sheath introduction course to go along with your frontier belt knife or any other large bowie knife you may have! *read note below*. Now you can have a beautiful custom-made knife sheath and the skills to make more in the future as you progress in your bladesmithing journey. Leather working is an excellent way to expand your area of expertise and safely store your blades.

    In this introductory leather sheath course we will be discussing sheath pattern making, basic leather stitching, basic rawhide construction, and  leather tooling. We will be demonstrating a two-piece leather and rawhide constructed sheath and finishing it in a rugged western style to suit most larger blade aesthetics. We provide all tools and materials for the workshop.

    Important note: This class is offered as a follow up to the frontier belt knife, however students that did not take this class and want to take this introductory course must bring a knife that is at least over five inches and below 10 inches. Generally straight blades are also appropriate for this class as well.

    Prior leather working knowledge is not needed and everyone is welcome.

    Please note: All classes are released for member-only early registration for one week before they're available for general registration.  If you're unable to add this class to your cart, you can wait for general release or join our membership program at any time!
  • March 30, 2024

    Iron Age Knife

    $190.00
    Prerequisite: Any Discovery Class or Letter Opener class Suggested skill level: Beginner and up Date: March 30, 2024 Time: 9 AM - 3 PM Location: Adam's Forge In this workshop, Adam’s Forge instructor Dossain Valencia will help equip you for a Viking adventure by teaching you to make a small iron age knife.  Not only is this an attractive tool, it’s also a pleasure to make, especially for those with little blacksmithing experience.  One of the advantages of this design is that it’s a one-piece knife; you don’t have the extra work of creating and attaching a handle. This enables you to bring home a beautiful and functional finished product. In this workshop, you’ll practice moving metal to specific dimensions, tapering and turning the beautifully curved handle.  You’ll also gain experience in learning to hold awkward shapes while striking them.  Hint: using the right tongs helps! Please note: All workshops are released for member-only early registration for one week before they're available for general registration.  If you're unable to add this class to your cart, you can wait for general release or join our membership program at any time!
  • March 31, 2024

    Paring Knife

    $210.00
    Date: March 31, 2024 Time: 9 AM - 4 PM Location: Adam's Forge Instructor: Kent Lulewich Prerequisite: Letter Opener Discovery Class Suggested Skill Level: Beginner and up

    Join us to create a paring knife to use in the kitchen or take on your next picnic.   This is a high carbon steel knife made from 80CRV2 steel.

    We start by creating the handle section that you can size to fit your hand perfectly. Then the blade is forged and heat-treated. Lastly, we will grind it to the level of sharpness you desire.

    The handle will be cord wrapped for both comfort and durability. We will discuss other handle options you can try on your own.

    While we will not have time in this class to make a sheath, we will show you examples so you can do this on your own.

    You will leave with a complete knife, ready to use.

    Tools: Students do not need to bring tools; we have everything that you will need. However, if you happen to have the following, please bring them so that you have the opportunity to use your own!

    Coarse files (i.e. 12 inch Heavy Duty Set from Harbor Freight)

    Tongs for ¼” x ¾” stock

    Class runs from 9am - 3pm with a one hour meal break. Please note: All classes are released for member-only early registration for one week before they're available for general registration.  If you're unable to add this class to your cart, you can wait for general release or join our membership program at any time!

Title

Go to Top