• August 17, 2024 - August 18, 2024

    EDC Knife with Ben Abbott

    $800.00

    Date: August 17 & 18, 2024

    Time: 9 AM - 5 PM

    Location: Adam's Forge

    Instructor: Ben Abbott

    Please note: This workshop takes place over two consecutive days.  

    Skill Level: Seasoned Beginner and up. This workshop will require skills on the anvil and experience on the grinders to get the most out of Ben’s instruction.

    An EDC knife is an everyday carry knife. It’s the most reliable one that you keep on you all the time. The EDC is light, small and practical. Every bladesmith has their own take on how they forge these and now is your chance to learn from Ben Abbott, the undefeated Forged in Fire champ, on his approach to forging this indispensable piece.

    This knife is the perfect size for everyday use, from opening boxes to cutting birthday cake!  We will go through forging, grinding and heat treating, plus handle design and ergonomics.

    This workshop will run from 9:00am – 5:00pm with an hour meal break

    Please note: the first week that registration for this workshop is open, spots may only be purchased by members. If you find you are unable to register, please check back after that time period has passed, or consider becoming a member of Adam’s Forge. All proceeds go towards supporting our amazing organization, and membership will bring you exclusive events and opportunities, along with a community of other blacksmiths!

     
  • June 22, 2024

    Discovery Letter Opener

    $175.00
    Click here to see all Discovery workshop dates & times Prerequisite: None. This is an introductory workshop Suggested skill level: Beginner and up Date: June 22, 2024 Time: 9 AM - 1 PM Location: Adam's Forge Not just a useful tool, but also the first step to all of your bladesmithing dreams, our Letter Opener is a Discovery workshop as well as a prerequisite for all of our blade workshops. The Letter Opener workshop is perfect as either an introductory or a follow-up course, as it introduces techniques that are useful in a wide range of blacksmithing projects. You’ll learn how to work with slightly larger stock, and be introduced to the proper choice and use of tongs to hold the hot steel. You’ll use the vise and a twisting wrench for the handle, and practice tapering and turning scrolls as well.  In forging the blade, you’ll learn about full-face and half-face hammer blows.  Finally, you can apply a hot wax finish to protect your letter opener. Don’t be afraid if that sounds like a lot; we’ll be there every step of the way to make sure you master all the skills you need. Please note: the first week that registration for this workshop is open, spots may only be purchased by members. If you find you are unable to register, please check back after that first week has passed, or consider becoming a member of Adam’s Forge. All proceeds go towards supporting our amazing organization, and membership will bring you exclusive events and opportunities, along with a community of other blacksmiths!

       
  • August 12, 2024 - August 13, 2024

    Malay Parang Chopper with Ben Abbott

    $800.00
      Date: August 12 & 13, 2024 Time: 9 AM - 5 PM Location: Adam's Forge Instructor: Ben Abbott Please note: This workshop takes place over two consecutive days.  

    Skill Level: Intermediate and up.  This workshop is suited to the smith who has stamina, confidence and experience with bladesmithing.

    You’ve watched Ben Abbott triumph undefeated on Forged in Fire. You’ve worked on your hammer control and perhaps practiced forging blades yourself. Now sign up for the ultimate culmination of the two. This is your chance to learn from Ben himself and forge your own Malay Parang Chopper under his tutelage.

    This small machete from Malaysia is an indispensable tool for yard work, bushcraft and camping applications.  Big enough to chop and clear brush but lean enough to slice and cut food.  Over the course of two days, we will forge and grind the blade, and attach the full-tang handle, working closely with Ben. Go home with your new tool, new knowledge and experience that will raise your work to a new level.

    Please note: the first week that registration for this workshop is open, spots may only be purchased by members. If you find you are unable to register, please check back after that first week has passed, or consider becoming a member of Adam’s Forge. All proceeds go towards supporting our amazing organization, and membership will bring you exclusive events and opportunities, along with a community of other blacksmiths!

     
  • July 20, 2024

    Discovery Letter Opener

    $175.00
    Click here to see all Discovery workshop dates & times Prerequisite: None. This is an introductory workshop Suggested skill level: Beginner and up Date: July 20, 2024 Time: 4 PM - 8 PM Location: Adam's Forge Not just a useful tool, but also the first step to all of your bladesmithing dreams, our Letter Opener is a Discovery workshop as well as a prerequisite for all of our blade workshops. The Letter Opener workshop is perfect as either an introductory or a follow-up course, as it introduces techniques that are useful in a wide range of blacksmithing projects. You’ll learn how to work with slightly larger stock, and be introduced to the proper choice and use of tongs to hold the hot steel. You’ll use the vise and a twisting wrench for the handle, and practice tapering and turning scrolls as well.  In forging the blade, you’ll learn about full-face and half-face hammer blows.  Finally, you can apply a hot wax finish to protect your letter opener. Don’t be afraid if that sounds like a lot; we’ll be there every step of the way to make sure you master all the skills you need.
  • June 28, 2024

    Open Forge

    $68.00
    Prerequisite: Any Discovery Class, the Forge Safety Workshop and Adam's Forge Membership  Please note: Beginning on January 1, 2024, all attendees of Open Forge sessions must have successfully passed the Forge Safety class, which is free to members and available for sign-up on the class calendar. If you wish to use the power hammers, you must have successfully passed the Power Hammer Safety class. Can't add this workshop to your cart? You can join the Membership Program here   Date: June 28, 2024 Time: 6:00 pm - 10:00 pm Location: Adam's Forge Not a class, but a swell time to get in the forge to do what you wanna do. You can bring your own material and work on your own project. This can be a chance to finish that piece you started or work out a technique you’ve been meaning to try. One of our intrepid instructors will be on hand for supervision and guidance, although these are not teaching workshops. Please note: these sessions are intended to support our students as they practice skills that are within their ability range.  Please do not use our forge and tools to experiment with new techniques that are beyond your skill level.  When in doubt, ask the instructor. As with all of our workshops, we require that students attending Open Forge sessions be at least 12 years old. A student who is not an adult (18 and older) will need to have a parent or guardian present at ALL times during the session. Thanks for thinking of safety first. Bring your own steel OR we have steel for sale at the forge: 1/4" square 3/8" square and round 1/2" square and round Sold by the foot sucker rod (higher carbon steel) sold in 7" sections
  • July 20, 2024 - July 21, 2024

    Chasing and Repoussé

    $298.00
      Date: July 20 & 21, 2024 Time: 10 AM - 4 PM Location: Adam's Forge This is an introductory class; no prerequisite is required. Suggested skill level: Beginner through advanced Please note: This class takes place both Saturday and Sunday from 10:00am - 4:00pm Instructor: Heather McLarty Students must attend both sessions. Experience transforming flat sheet metal into three dimensional sculpture using the techniques of repoussé and chasing. These techniques have been used for centuries in many cultures to express the ideas of makers, from jewelry, sword fittings and armor to the Statue of Liberty!   Students are encouraged to design their image and get input from the instructor beforehand. Your sketch should fit inside a 3 or 4 inch square.  Designs may be representational or abstract. We will start with an explanation of the various approaches and talk about design. After a bit of demonstration each student will design and execute their work in sheet copper. We will use pitch in part of the process. There are so many options, come try it for yourself! The fee for the class includes copper sheet. Pitch, pitch bowls and tooling will be provided. Students are encouraged to bring any tooling of their own (such as chasing hammers) but it is not necessary. Heat sources such as heat guns and plumber’s torches will be shared. If you have a heat gun, please bring it.  
  • August 16, 2024

    Tomahawk with Ben Abbott

    $400.00
    Suggested skill level: Seasoned beginner and up. This is a fast-paced class and we'll be moving plenty of metal. This workshop is suited to those with stamina and experience with high carbon steel. Date: August 16, 2024 Time: 9 AM - 5 PM Location: Adam's Forge Instructor: Ben Abbott The tomahawk is an icon of the old west and the mythical mountaineers of early America. Used and traded among settlers and Native Americans as tools they were extremely important on the frontier. Blacksmiths that knew how to forge these tools were invaluable to individuals facing the rugged wilderness of the new world. Now we get to see it forged to life by Ben Abbott at Adam’s Forge. Join us for a workshop that will elevate your skills at the anvil as you learn from the Forged in fire champion and judge. This workshop will test what you already know and present you with new skills to master. Forge welding and hammering to specific dimensions will be necessary to follow along with Ben.

    You’ll learn to pre-shape a steel bar, set a wrapped-eye forge weld, and do a quick, competition-style quench and temper.

    Please note: All workshops are released for member-only early registration for one week before they're available for general registration.  If you're unable to add this class to your cart, you can wait for general release or join our membership program at any time!
  • June 30, 2024

    Layered Pendant

    $190.00
    Prerequisite: None. This is an introductory workshop Suggested skill level: Beginner and up Date: June 30, 2024 Time: 10 AM - 4 PM including an hour lunch break Location: Adam's Forge
    Adam’s Forge is delighted to partner with Metal Artist Chloe Kono aka Chloeography in offering a jewelry making workshop.  Chloe holds a Bachelor of Fine Arts degree from California State University Long Beach and has been creating metal art for over a decade.  Her aesthetic ranges from clever, humorous, and whimsical, to luminous heirloom pieces.
    In this workshop, you’ll design and create a layered pendant with simple sheet metal fabrication! Students will learn about the basic jewelry making hand tools, the nature of non-ferrous metals, and foundational techniques including sawing, texturing, riveting, and finishing.
    If you have a design that you’d like to make, it should be approximately between 1 and 2 inches overall.  Chloe will have designs on hand for you to try, or you can improvise on the day!
    Class fee includes raw materials and access to all tools and equipment needed to finish the project.
    Optional: Sterling Silver Sheet (3x3, 22g) is available for purchase if students would like an upgrade.
    Please note: the first week that registration for this workshop is open, spots may only be purchased by members. If you find you are unable to register, please check back after that first week has passed, or consider becoming a member of Adam’s Forge. All proceeds go towards supporting our amazing organization, and membership will bring you exclusive events and opportunities, along with a community of other blacksmiths!

       
  • June 22, 2024

    Discovery Letter Opener

    $175.00
    Click here to see all Discovery workshop dates & times Prerequisite: None. This is an introductory workshop Suggested skill level: Beginner and up Date: June 22, 2024 Time: 2 PM - 6 PM Location: Adam's Forge Not just a useful tool, but also the first step to all of your bladesmithing dreams, our Letter Opener is a Discovery workshop as well as a prerequisite for all of our blade workshops. The Letter Opener workshop is perfect as either an introductory or a follow-up course, as it introduces techniques that are useful in a wide range of blacksmithing projects. You’ll learn how to work with slightly larger stock, and be introduced to the proper choice and use of tongs to hold the hot steel. You’ll use the vise and a twisting wrench for the handle, and practice tapering and turning scrolls as well.  In forging the blade, you’ll learn about full-face and half-face hammer blows.  Finally, you can apply a hot wax finish to protect your letter opener. Don’t be afraid if that sounds like a lot; we’ll be there every step of the way to make sure you master all the skills you need.
  • July 20, 2024

    Keyhole Spatula

    $190.00
    Date: July 20, 2024 Time: 9 AM - 3 PM Location: Adam's Forge Instructor: Becky Schimpff Prerequisite: Any Discovery workshop plus 2-3 project workshops.  The more experienced smith will get more out of this workshop. Suggested Skill Level: Seasoned Beginner and up

    Learn to forge a keyhole spatula in this fun class taught by Becky Schimpff. The keyhole spatula is a traditional shape that was used historically for fireplace cooking, with at least one spatula in every kitchen. Come forge your own! We promise it will be a great addition to your own kitchen, bbq or camp set-up.

    Forging a keyhole shape presents a unique challenge: how do you get the metal to move into the desired shape with your hammer and anvil? In this class, Becky will introduce the concept of creating a pre-shape that allows us to isolate and then manipulate the bar to create the desired outcome, in this case a keyhole shape. This is an important concept in blacksmithing and understanding the concepts will help you as you approach your own projects.

    Once set up with a pre-shape, Becky will demonstrate how to spread the bar using the peen of your hammer. This is an excellent exercise in hammer control, and we'll spend some time looking at hammer blows and how your hammer blow impacts your results.

    Once the spatula is formed, Becky will shift to handle design. She'll show how to approach the handle and design considerations. Ultimately this part of the project is up to you, so bring your ideas and creativity!

    Lastly, we'll put on a food safe finish so your spatula will be ready to go to work.

    There is lots of learning built into this project and the skills you learn will definitely improve your blacksmithing repertoire. And you'll get to come home with a super rad spatula!

    Becky is passionate about blacksmithing education; she is currently ABANA Education Chair and a member of the CBA Education Committee. She wrote a how-to on the keyhole spatula for the California Blacksmith Magazine and her article is currently available in the complementary version of the magazine on the CBA website. Check it out here - www.calsmith.org.

    Class runs from 9am - 3pm with a one hour meal break.

    Please note: All classes are released for member-only early registration for one week before they're available for general registration.  If you're unable to add this class to your cart, you can wait for general release or join our membership program at any time!
  • July 13, 2024

    Resurrecting Relics

    $200.00
    Click here to see all Knife workshop dates and times Date: July 13, 2024 Time: 9 AM - 3 PM Location: Adam's Forge Instructor: Will Larranaga Prerequisite: Letter Opener Discovery Class.  The more experienced smith will get more out of this workshop. Suggested Skill Level: Beginner and up

     Join us for a refreshing workshop centered around used, found, vintage, and salvaged materials. The focus of this class is not around finishing a project, but methods and best practices when using found materials. From old tools to rebar and leaf springs, it's all useful and begging to be turned into something new. Turn that old pipe wrench in your garage into an interesting new knife that will be a great talking piece! Reforge some of that leaf spring that you have laying around into a new hot punching set for your next blacksmithing project! The possibilities will surprise you and the skills you take away from this workshop will be useful in many different blade or tool forging applications.

    In this workshop we will discuss safety issues that must be taken into consideration with any steel that is old or used as well as heat treatment of steels that are not known to us. We will then demonstrate safe preparation of our steel prior to forging. This will be followed by a hot forging demonstration on bringing an old tool to life to become a working tool.

    This workshop will be taught with an emphasis on blades but we also encourage participants to explore other types of tooling and can guide those that wish to make tools. This class is best for beginner to seasoned smiths that want to try to expand their materials knowledge, heat treatment, and creativity.

    Participants are encouraged to bring in tools and found materials if they wish, however they are not required as we will also provide plenty for students to pick and choose from.

    Class runs from 9am - 3pm with a one hour meal break. Please note: All classes are released for member-only early registration for one week before they're available for general registration.  If you're unable to add this class to your cart, you can wait for general release or join our membership program at any time!
  • July 05, 2024

    Discovery Letter Opener

    $175.00
    Click here to see all Discovery workshop dates & times Prerequisite: None. This is an introductory workshop Suggested skill level: Beginner and up Date: July 5, 2024 Time: 10 AM - 2 PM Location: Adam's Forge Not just a useful tool, but also the first step to all of your bladesmithing dreams, our Letter Opener is a Discovery workshop as well as a prerequisite for all of our blade workshops. The Letter Opener workshop is perfect as either an introductory or a follow-up course, as it introduces techniques that are useful in a wide range of blacksmithing projects. You’ll learn how to work with slightly larger stock, and be introduced to the proper choice and use of tongs to hold the hot steel. You’ll use the vise and a twisting wrench for the handle, and practice tapering and turning scrolls as well.  In forging the blade, you’ll learn about full-face and half-face hammer blows.  Finally, you can apply a hot wax finish to protect your letter opener. Don’t be afraid if that sounds like a lot; we’ll be there every step of the way to make sure you master all the skills you need.
  • June 23, 2024

    Discovery Bottle Opener

    $175.00
    Click here to see all Discovery workshop dates & times Prerequisite: None. This is an introductory class Suggested Skill Level: Beginner and up Date: June 23, 2024 Time: 9 AM - 1 PM Location: Adam's Forge Be the envy of all at your next social gathering, while you crack open everyone’s beverages with your new handy-dandy bottle opener, made by your own two hands! The Bottle Opener workshop is perfect as either an introductory or a follow-up course, as it introduces techniques that are useful in a wide range of blacksmithing projects.  You’ll learn how to work with slightly larger stock, and be introduced to the proper choice and use of tongs to hold the hot steel. You’ll use the vise and a twisting wrench for the handle, and practice tapering and turning scrolls as well.  In forging the handle, you’ll learn about shaping a square rod into an octagon, or if you prefer, a round, tapered bar.  Finally, you can apply a hot wax finish to protect your bottle opener. Don’t worry if that sounds intimidating, we promise that anyone can do it. Please note: the first week that registration for this workshop is open, spots may only be purchased by members. If you find you are unable to register, please check back after that first week has passed, or consider becoming a member of Adam’s Forge. All proceeds go towards supporting our amazing organization, and membership will bring you exclusive events and opportunities, along with a community of other blacksmiths!

         
  • Date: August 14, 2024 Time: 4 PM - 9 PM Location: Adam's Forge Instructor: Ben Abbott

    Join us at Adam’s Forge for a night of excitement and hot iron as we welcome Forged in Fire’s nine-time champion and judge Ben Abbott! Watch how it’s really done as Ben hand forges a Celtic ring knife. Bring your friends and family for an unforgettable evening that will leave you inspired for the next time you come back to the forge.

    The Celtic ring knife was a symbol of an individual’s freedom in medieval Europe among the Celtic people. Used as a personal tool or back-up weapon, these knives were very important in iron age cultures.

    This event runs from 4:00pm to 9:00pm.  Feel free to bring snacks if you wish. Please note: All workshops are released for member-only early registration for one week before they're available for general registration.  If you're unable to add this class to your cart, you can wait for general release or join our membership program at any time!
  • July 12, 2024

    Forge Safety

    $125.00
    Prerequisite: Any Discovery Class  Please note, this class is required for all  Adam’s Forge members who wish to attend Open Forge sessions.    Date: July 12, 2024 Time: 6 pm - 10 pm Location: Adam's Forge

    This workshop is designed to introduce you to the best practices for safely using our shop equipment with an emphasis on power tools.  From the bandsaw, belt grinders, bench grinder & wire wheel to drill presses and how to safely shutdown the forges, our instructors will demonstrate proper use and guide you as you practice, learn, and finally demonstrate your ability to follow all the safety guidelines.

    Once you sign up, you’ll then take a series of online tests, which you must pass with a minimum of 85% prior to the start of your class.  Follow the online instructions to forward the test results to blacksmithclasses@gmail.com.  The on-site class is 4-hours in length and the class size is limited to 4 people.

    Please note: All workshops are released for member-only early registration for one week before they're available for general registration.  If you're unable to add this to your cart, you can wait for general release or join our membership program at any time!

  • July 06, 2024

    Open Forge

    $68.00
    Prerequisite: Any Discovery Class, the Forge Safety Workshop and Adam's Forge Membership  Please note: Beginning on January 1, 2024, all attendees of Open Forge sessions must have successfully passed the Forge Safety class, which is free to members and available for sign-up on the class calendar. If you wish to use the power hammers, you must have successfully passed the Power Hammer Safety class. Can't add this workshop to your cart? You can join the Membership Program here   Date: July 6, 2024 Time: 3:30 pm - 7:30 pm Location: Adam's Forge Not a class, but a swell time to get in the forge to do what you wanna do. You can bring your own material and work on your own project. This can be a chance to finish that piece you started or work out a technique you’ve been meaning to try. One of our intrepid instructors will be on hand for supervision and guidance, although these are not teaching workshops. Please note: these sessions are intended to support our students as they practice skills that are within their ability range.  Please do not use our forge and tools to experiment with new techniques that are beyond your skill level.  When in doubt, ask the instructor. As with all of our workshops, we require that students attending Open Forge sessions be at least 12 years old. A student who is not an adult (18 and older) will need to have a parent or guardian present at ALL times during the session. Thanks for thinking of safety first. Bring your own steel OR we have steel for sale at the forge: 1/4" square 3/8" square and round 1/2" square and round Sold by the foot sucker rod (higher carbon steel) sold in 7" sections
  • June 30, 2024

    Botanical Forms

    $175.00
    Prerequisite: Any Discovery Class Date: June 30, 2024 Time: 2 PM - 6 PM Location: Adam's Forge In this class we will sculpt steel with hammer, fullers and anvil to forge organic leaf and plant forms. The leaf motif has always been used to add visual interest to forged pieces from architectural work to jewelry and everything in between. Once you learn these techniques you can add leaves to almost all your projects. In this class we will demonstrate a variety of different leaf and foliage forms. They  can be made to look very realistic or representational depending on your preference.  This is a fun class in which you will get to exercise your creative license and let your imagination run free. Here’s a list of some of the skills you will learn in this class... Forging short tapers Isolating material with half faced blows to forge the leaf pre-form Drawing out stem material and turning it from square to round Using the pein and/or fullers to spread metal directionally and suggest vein texture Fold forming Light upsetting and drastic spreading to create the ginkgo leaf This class is a great way to practice your hammer accuracy and learn how to pre-form the steel to create the shapes you want to materialize. Think of it as a class to learn and practice making leaves that will adorn your future projects. Please note: All classes are released for member-only early registration for one week before they're available for general registration.  If you're unable to add this class to your cart, you can wait for general release or join our membership program at any time!
  • Click here to see all Knife workshop dates and times Date: June 26, 2024 Time: 9 AM - 3 PM Location: Adam's Forge

    Instructor: Will Larranaga

    Prerequisite: Letter Opener Discovery Class plus 2 or 3 project workshops or equivalent experience.

    Suggested skill level: Seasoned Beginner and up.  Participants should have solid blacksmithing skills and be confident using hand tools before moving to the power hammer.

    The railroad spike is one of the first knife projects every bladesmith makes; it's almost a rite of passage on your way to becoming a bladesmith. Step up your experience by signing up for our power hammer railroad spike class! You'll learn the safe operation of the power hammers at our facility, and also how to forge a well-made railroad spike knife with our knowledgeable instructors. Come down to Adam’s Forge to gain the skill and know-how to make your very own.

    In this class we'll discuss blade profiling under the power hammer, and we will walk through the basics of heat treatment and grinding to ensure that you walk out satisfied and proud of the blade you make with us. Bring your friends over for a good time and make some knives!

    Please note: the first week that registration for this workshop is open, spots may only be purchased by members. If you find you are unable to register, please check back after that first week has passed, or consider becoming a member of Adam’s Forge. All proceeds go towards supporting our amazing organization, and membership will bring you exclusive events and opportunities, along with a community of other blacksmiths!

  • June 21, 2024

    Discovery Letter Opener

    $1,980.00
    Prerequisite: None. This is an introductory workshop Suggested skill level: Beginner and up Date: June 21, 2024 Time: 9 AM - 1 PM Location: Adam's Forge Not just a useful tool, but also the first step to all of your bladesmithing dreams, our Letter Opener is a Discovery workshop as well as a prerequisite for all of our blade workshops. The Letter Opener workshop is perfect as either an introductory or a follow-up course, as it introduces techniques that are useful in a wide range of blacksmithing projects. You’ll learn how to work with slightly larger stock, and be introduced to the proper choice and use of tongs to hold the hot steel. You’ll use the vise and a twisting wrench for the handle, and practice tapering and turning scrolls as well.  In forging the blade, you’ll learn about full-face and half-face hammer blows.  Finally, you can apply a hot wax finish to protect your letter opener. Don’t be afraid if that sounds like a lot; we’ll be there every step of the way to make sure you master all the skills you need.
  • September 28, 2024 - September 29, 2024

    Introduction to Damascus Steel

    $650.00
    Click here to see all Knife workshop dates and times Dates & Times: September 28, 2024 from 2:00pm - 10:00pm September 29, 2024 from 2:00pm - 8:00pm Students must attend both days. Location: Adam's Forge Instructor: Dossain Valencia Prerequisites: Any Discovery workshop plus a Power Hammer Safety Workshop.  Previous experience with forge welding is recommended. Suggested Skill Level: Seasoned beginner and up. Participants should have solid blacksmithing skills and be confident using hand tools before moving to the power hammer. In this workshop, Adam's Forge lead instructor Dossain Valencia will guide you in making a pattern-welded Damascus billet using contrasting high carbon steels.  You'll gain instruction in preparing the billets, forge welding, and working with the power hammers & hydraulic press to draw them out.  The process will be repeated several times to increase the number of layers.  Finally, preliminary etching to reveal the pattern will be addressed, followed by a discussion of possible uses as well as tips on working with Damascus for future projects. This workshop will run for 8 hours on day 1 and 6 hours on day 2 with an hour meal break. Please note: the first week that registration for this workshop is open, spots may only be purchased by members. If you find you are unable to register, please check back after that first week has passed, or consider becoming a member of Adam’s Forge. All proceeds go towards supporting our amazing organization, and membership will bring you exclusive events and opportunities, along with a community of other blacksmiths!    
  • September 29, 2024

    Discovery BBQ Tool

    $175.00
    Click here to see all Discovery workshop dates & times Prerequisite: None. This is the first workshop to take. Suggested skill level: Beginner and up Date: September 29, 2024 Time: 9 AM  - 1 PM Location: Adam's Forge Are you a grill master? Do your weekends revolve around the smoking of various proteins? Do you live and breathe charcoal and fire? Then there’s one thing your rig needs: your very own, hand-made BBQ tool, forged in fire five times hotter than any grill. This workshop is perfect for beginners. Because you’re working with longer steel, you can mostly use your hands instead of tongs, which means you can focus on learning the basics of hammering and temperature control without having to also focus on manipulating the tongs. For more experienced blacksmiths, there’s lots of opportunity to experiment with different techniques. And best of all, you’ll go home with your very own, one-of-a-kind BBQ tool! Sound complicated? We promise it’s not. We’ll teach you everything you need to know.
  • September 28, 2024

    Discovery Letter Opener

    $175.00
    Click here to see all Discovery workshop dates & times Prerequisite: None. This is an introductory workshop Suggested skill level: Beginner and up Date: September 28, 2024 Time: 9 AM - 1 PM Location: Adam's Forge Not just a useful tool, but also the first step to all of your bladesmithing dreams, our Letter Opener is a Discovery workshop as well as a prerequisite for all of our blade workshops. The Letter Opener workshop is perfect as either an introductory or a follow-up course, as it introduces techniques that are useful in a wide range of blacksmithing projects. You’ll learn how to work with slightly larger stock, and be introduced to the proper choice and use of tongs to hold the hot steel. You’ll use the vise and a twisting wrench for the handle, and practice tapering and turning scrolls as well.  In forging the blade, you’ll learn about full-face and half-face hammer blows.  Finally, you can apply a hot wax finish to protect your letter opener. Don’t be afraid if that sounds like a lot; we’ll be there every step of the way to make sure you master all the skills you need.
  • September 22, 2024

    Discovery Letter Opener

    $175.00
    Click here to see all Discovery workshop dates & times Prerequisite: None. This is an introductory workshop Suggested skill level: Beginner and up Date: September 22, 2024 Time: 9 AM - 1 PM Location: Adam's Forge Not just a useful tool, but also the first step to all of your bladesmithing dreams, our Letter Opener is a Discovery workshop as well as a prerequisite for all of our blade workshops. The Letter Opener workshop is perfect as either an introductory or a follow-up course, as it introduces techniques that are useful in a wide range of blacksmithing projects. You’ll learn how to work with slightly larger stock, and be introduced to the proper choice and use of tongs to hold the hot steel. You’ll use the vise and a twisting wrench for the handle, and practice tapering and turning scrolls as well.  In forging the blade, you’ll learn about full-face and half-face hammer blows.  Finally, you can apply a hot wax finish to protect your letter opener. Don’t be afraid if that sounds like a lot; we’ll be there every step of the way to make sure you master all the skills you need.
  • September 21, 2024

    Discovery Bottle Opener

    $175.00
    Click here to see all Discovery workshop dates & times Prerequisite: None. This is an introductory class Suggested Skill Level: Beginner and up Date: September 21, 2024 Time: 4 PM - 8 PM Location: Adam's Forge Be the envy of all at your next social gathering, while you crack open everyone’s beverages with your new handy-dandy bottle opener, made by your own two hands! The Bottle Opener workshop is perfect as either an introductory or a follow-up course, as it introduces techniques that are useful in a wide range of blacksmithing projects.  You’ll learn how to work with slightly larger stock, and be introduced to the proper choice and use of tongs to hold the hot steel. You’ll use the vise and a twisting wrench for the handle, and practice tapering and turning scrolls as well.  In forging the handle, you’ll learn about shaping a square rod into an octagon, or if you prefer, a round, tapered bar.  Finally, you can apply a hot wax finish to protect your bottle opener. Don’t worry if that sounds intimidating, we promise that anyone can do it.

Title

Go to Top