• July 20, 2024 - July 21, 2024

    Chasing and Repoussé

    $298.00
      Date: July 20 & 21, 2024 Time: 10 AM - 4 PM Location: Adam's Forge This is an introductory class; no prerequisite is required. Suggested skill level: Beginner through advanced Please note: This class takes place both Saturday and Sunday from 10:00am - 4:00pm Instructor: Heather McLarty Students must attend both sessions. Experience transforming flat sheet metal into three dimensional sculpture using the techniques of repoussé and chasing. These techniques have been used for centuries in many cultures to express the ideas of makers, from jewelry, sword fittings and armor to the Statue of Liberty!   Students are encouraged to design their image and get input from the instructor beforehand. Your sketch should fit inside a 3 or 4 inch square.  Designs may be representational or abstract. We will start with an explanation of the various approaches and talk about design. After a bit of demonstration each student will design and execute their work in sheet copper. We will use pitch in part of the process. There are so many options, come try it for yourself! The fee for the class includes copper sheet. Pitch, pitch bowls and tooling will be provided. Students are encouraged to bring any tooling of their own (such as chasing hammers) but it is not necessary. Heat sources such as heat guns and plumber’s torches will be shared. If you have a heat gun, please bring it.  
  • June 23, 2024

    Discovery Bottle Opener

    $175.00
    Click here to see all Discovery workshop dates & times Prerequisite: None. This is an introductory class Suggested Skill Level: Beginner and up Date: June 23, 2024 Time: 12 PM - 4 PM Location: Adam's Forge Be the envy of all at your next social gathering, while you crack open everyone’s beverages with your new handy-dandy bottle opener, made by your own two hands! The Bottle Opener workshop is perfect as either an introductory or a follow-up course, as it introduces techniques that are useful in a wide range of blacksmithing projects.  You’ll learn how to work with slightly larger stock, and be introduced to the proper choice and use of tongs to hold the hot steel. You’ll use the vise and a twisting wrench for the handle, and practice tapering and turning scrolls as well.  In forging the handle, you’ll learn about shaping a square rod into an octagon, or if you prefer, a round, tapered bar.  Finally, you can apply a hot wax finish to protect your bottle opener. Don’t worry if that sounds intimidating, we promise that anyone can do it. Please note: the first week that registration for this workshop is open, spots may only be purchased by members. If you find you are unable to register, please check back after that first week has passed, or consider becoming a member of Adam’s Forge. All proceeds go towards supporting our amazing organization, and membership will bring you exclusive events and opportunities, along with a community of other blacksmiths!

         
  • Click here to see all Knife workshop dates and times Date: June 26, 2024 Time: 9 AM - 3 PM Location: Adam's Forge

    Instructor: Will Larranaga

    Prerequisite: Letter Opener Discovery Class plus 2 or 3 project workshops or equivalent experience.

    Suggested skill level: Seasoned Beginner and up.  Participants should have solid blacksmithing skills and be confident using hand tools before moving to the power hammer.

    The railroad spike is one of the first knife projects every bladesmith makes; it's almost a rite of passage on your way to becoming a bladesmith. Step up your experience by signing up for our power hammer railroad spike class! You'll learn the safe operation of the power hammers at our facility, and also how to forge a well-made railroad spike knife with our knowledgeable instructors. Come down to Adam’s Forge to gain the skill and know-how to make your very own.

    In this class we'll discuss blade profiling under the power hammer, and we will walk through the basics of heat treatment and grinding to ensure that you walk out satisfied and proud of the blade you make with us. Bring your friends over for a good time and make some knives!

    Please note: the first week that registration for this workshop is open, spots may only be purchased by members. If you find you are unable to register, please check back after that first week has passed, or consider becoming a member of Adam’s Forge. All proceeds go towards supporting our amazing organization, and membership will bring you exclusive events and opportunities, along with a community of other blacksmiths!

  • June 28, 2024

    Open Forge

    $68.00
    Prerequisite: Any Discovery Class, the Forge Safety Workshop and Adam's Forge Membership  Please note: Beginning on January 1, 2024, all attendees of Open Forge sessions must have successfully passed the Forge Safety class, which is free to members and available for sign-up on the class calendar. If you wish to use the power hammers, you must have successfully passed the Power Hammer Safety class. Can't add this workshop to your cart? You can join the Membership Program here   Date: June 28, 2024 Time: 6:00 pm - 10:00 pm Location: Adam's Forge Not a class, but a swell time to get in the forge to do what you wanna do. You can bring your own material and work on your own project. This can be a chance to finish that piece you started or work out a technique you’ve been meaning to try. One of our intrepid instructors will be on hand for supervision and guidance, although these are not teaching workshops. Please note: these sessions are intended to support our students as they practice skills that are within their ability range.  Please do not use our forge and tools to experiment with new techniques that are beyond your skill level.  When in doubt, ask the instructor. As with all of our workshops, we require that students attending Open Forge sessions be at least 12 years old. A student who is not an adult (18 and older) will need to have a parent or guardian present at ALL times during the session. Thanks for thinking of safety first. Bring your own steel OR we have steel for sale at the forge: 1/4" square 3/8" square and round 1/2" square and round Sold by the foot sucker rod (higher carbon steel) sold in 7" sections
  • June 29, 2024

    Discovery Letter Opener

    $175.00
    Click here to see all Discovery workshop dates & times Prerequisite: None. This is an introductory workshop Suggested skill level: Beginner and up Date: June 29, 2024 Time: 9 AM - 1 PM Location: Adam's Forge Not just a useful tool, but also the first step to all of your bladesmithing dreams, our Letter Opener is a Discovery workshop as well as a prerequisite for all of our blade workshops. The Letter Opener workshop is perfect as either an introductory or a follow-up course, as it introduces techniques that are useful in a wide range of blacksmithing projects. You’ll learn how to work with slightly larger stock, and be introduced to the proper choice and use of tongs to hold the hot steel. You’ll use the vise and a twisting wrench for the handle, and practice tapering and turning scrolls as well.  In forging the blade, you’ll learn about full-face and half-face hammer blows.  Finally, you can apply a hot wax finish to protect your letter opener. Don’t be afraid if that sounds like a lot; we’ll be there every step of the way to make sure you master all the skills you need. Please note: the first week that registration for this workshop is open, spots may only be purchased by members. If you find you are unable to register, please check back after that first week has passed, or consider becoming a member of Adam’s Forge. All proceeds go towards supporting our amazing organization, and membership will bring you exclusive events and opportunities, along with a community of other blacksmiths!

       
  • June 30, 2024

    Discovery Bottle Opener

    $175.00
    Click here to see all Discovery workshop dates & times Prerequisite: None. This is an introductory class Suggested Skill Level: Beginner and up Date: June 30, 2024 Time: 9 AM - 1 PM Location: Adam's Forge Be the envy of all at your next social gathering, while you crack open everyone’s beverages with your new handy-dandy bottle opener, made by your own two hands! The Bottle Opener workshop is perfect as either an introductory or a follow-up course, as it introduces techniques that are useful in a wide range of blacksmithing projects.  You’ll learn how to work with slightly larger stock, and be introduced to the proper choice and use of tongs to hold the hot steel. You’ll use the vise and a twisting wrench for the handle, and practice tapering and turning scrolls as well.  In forging the handle, you’ll learn about shaping a square rod into an octagon, or if you prefer, a round, tapered bar.  Finally, you can apply a hot wax finish to protect your bottle opener. Don’t worry if that sounds intimidating, we promise that anyone can do it. Please note: the first week that registration for this workshop is open, spots may only be purchased by members. If you find you are unable to register, please check back after that first week has passed, or consider becoming a member of Adam’s Forge. All proceeds go towards supporting our amazing organization, and membership will bring you exclusive events and opportunities, along with a community of other blacksmiths!

         
  • June 30, 2024

    Layered Pendant

    $190.00
    Prerequisite: None. This is an introductory workshop Suggested skill level: Beginner and up Date: June 30, 2024 Time: 10 AM - 4 PM including an hour lunch break Location: Adam's Forge
    Adam’s Forge is delighted to partner with Metal Artist Chloe Kono aka Chloeography in offering a jewelry making workshop.  Chloe holds a Bachelor of Fine Arts degree from California State University Long Beach and has been creating metal art for over a decade.  Her aesthetic ranges from clever, humorous, and whimsical, to luminous heirloom pieces.
    In this workshop, you’ll design and create a layered pendant with simple sheet metal fabrication! Students will learn about the basic jewelry making hand tools, the nature of non-ferrous metals, and foundational techniques including sawing, texturing, riveting, and finishing.
    If you have a design that you’d like to make, it should be approximately between 1 and 2 inches overall.  Chloe will have designs on hand for you to try, or you can improvise on the day!
    Class fee includes raw materials and access to all tools and equipment needed to finish the project.
    Optional: Sterling Silver Sheet (3x3, 22g) is available for purchase if students would like an upgrade.
    Please note: the first week that registration for this workshop is open, spots may only be purchased by members. If you find you are unable to register, please check back after that first week has passed, or consider becoming a member of Adam’s Forge. All proceeds go towards supporting our amazing organization, and membership will bring you exclusive events and opportunities, along with a community of other blacksmiths!

       
  • June 30, 2024

    Botanical Forms

    $175.00
    Prerequisite: Any Discovery Class Date: June 30, 2024 Time: 2 PM - 6 PM Location: Adam's Forge In this class we will sculpt steel with hammer, fullers and anvil to forge organic leaf and plant forms. The leaf motif has always been used to add visual interest to forged pieces from architectural work to jewelry and everything in between. Once you learn these techniques you can add leaves to almost all your projects. In this class we will demonstrate a variety of different leaf and foliage forms. They  can be made to look very realistic or representational depending on your preference.  This is a fun class in which you will get to exercise your creative license and let your imagination run free. Here’s a list of some of the skills you will learn in this class... Forging short tapers Isolating material with half faced blows to forge the leaf pre-form Drawing out stem material and turning it from square to round Using the pein and/or fullers to spread metal directionally and suggest vein texture Fold forming Light upsetting and drastic spreading to create the ginkgo leaf This class is a great way to practice your hammer accuracy and learn how to pre-form the steel to create the shapes you want to materialize. Think of it as a class to learn and practice making leaves that will adorn your future projects. Please note: All classes are released for member-only early registration for one week before they're available for general registration.  If you're unable to add this class to your cart, you can wait for general release or join our membership program at any time!
  • Prerequisite: None. This is an introductory workshop Suggested skill level: Beginner and up Date: August 25, 2024 Time: 9 AM - 1 PM Location: Adam's Forge This workshop is held in conjunction with the Craft Contemporary Museum.  To register, please follow this link: Introduction to Blacksmithing Not just a useful tool, but also the first step to all of your bladesmithing dreams, our Letter Opener is a Discovery workshop as well as a prerequisite for all of our blade workshops. The Letter Opener workshop is perfect as either an introductory or a follow-up course, as it introduces techniques that are useful in a wide range of blacksmithing projects. You’ll learn how to work with slightly larger stock, and be introduced to the proper choice and use of tongs to hold the hot steel. You’ll use the vise and a twisting wrench for the handle, and practice tapering and turning scrolls as well.  In forging the blade, you’ll learn about full-face and half-face hammer blows.  Finally, you can apply a hot wax finish to protect your letter opener. Don’t be afraid if that sounds like a lot; we’ll be there every step of the way to make sure you master all the skills you need.
  • July 07, 2024

    Discovery Bottle Opener

    $175.00
    Click here to see all Discovery workshop dates & times Prerequisite: None. This is an introductory class Suggested Skill Level: Beginner and up Date: July 7, 2024 Time: 9 AM - 1 PM Location: Adam's Forge Be the envy of all at your next social gathering, while you crack open everyone’s beverages with your new handy-dandy bottle opener, made by your own two hands! The Bottle Opener workshop is perfect as either an introductory or a follow-up course, as it introduces techniques that are useful in a wide range of blacksmithing projects.  You’ll learn how to work with slightly larger stock, and be introduced to the proper choice and use of tongs to hold the hot steel. You’ll use the vise and a twisting wrench for the handle, and practice tapering and turning scrolls as well.  In forging the handle, you’ll learn about shaping a square rod into an octagon, or if you prefer, a round, tapered bar.  Finally, you can apply a hot wax finish to protect your bottle opener. Don’t worry if that sounds intimidating, we promise that anyone can do it.
  • July 04, 2024

    Discovery Bottle Opener

    $175.00
    Click here to see all Discovery workshop dates & times Prerequisite: None. This is an introductory class Suggested Skill Level: Beginner and up Date: July 4, 2024 Time: 10 AM - 2 PM Location: Adam's Forge Be the envy of all at your next social gathering, while you crack open everyone’s beverages with your new handy-dandy bottle opener, made by your own two hands! The Bottle Opener workshop is perfect as either an introductory or a follow-up course, as it introduces techniques that are useful in a wide range of blacksmithing projects.  You’ll learn how to work with slightly larger stock, and be introduced to the proper choice and use of tongs to hold the hot steel. You’ll use the vise and a twisting wrench for the handle, and practice tapering and turning scrolls as well.  In forging the handle, you’ll learn about shaping a square rod into an octagon, or if you prefer, a round, tapered bar.  Finally, you can apply a hot wax finish to protect your bottle opener. Don’t worry if that sounds intimidating, we promise that anyone can do it.
  • July 05, 2024

    Discovery Letter Opener

    $175.00
    Click here to see all Discovery workshop dates & times Prerequisite: None. This is an introductory workshop Suggested skill level: Beginner and up Date: July 5, 2024 Time: 10 AM - 2 PM Location: Adam's Forge Not just a useful tool, but also the first step to all of your bladesmithing dreams, our Letter Opener is a Discovery workshop as well as a prerequisite for all of our blade workshops. The Letter Opener workshop is perfect as either an introductory or a follow-up course, as it introduces techniques that are useful in a wide range of blacksmithing projects. You’ll learn how to work with slightly larger stock, and be introduced to the proper choice and use of tongs to hold the hot steel. You’ll use the vise and a twisting wrench for the handle, and practice tapering and turning scrolls as well.  In forging the blade, you’ll learn about full-face and half-face hammer blows.  Finally, you can apply a hot wax finish to protect your letter opener. Don’t be afraid if that sounds like a lot; we’ll be there every step of the way to make sure you master all the skills you need.

Title

Go to Top