• Prerequisite: None. This is an introductory workshop Suggested skill level: Beginner and up Date: August 25, 2024 Time: 9 AM - 1 PM Location: Adam's Forge This workshop is held in conjunction with the Craft Contemporary Museum.  To register, please follow this link: Introduction to Blacksmithing Not just a useful tool, but also the first step to all of your bladesmithing dreams, our Letter Opener is a Discovery workshop as well as a prerequisite for all of our blade workshops. The Letter Opener workshop is perfect as either an introductory or a follow-up course, as it introduces techniques that are useful in a wide range of blacksmithing projects. You’ll learn how to work with slightly larger stock, and be introduced to the proper choice and use of tongs to hold the hot steel. You’ll use the vise and a twisting wrench for the handle, and practice tapering and turning scrolls as well.  In forging the blade, you’ll learn about full-face and half-face hammer blows.  Finally, you can apply a hot wax finish to protect your letter opener. Don’t be afraid if that sounds like a lot; we’ll be there every step of the way to make sure you master all the skills you need.
  • July 28, 2024

    Discovery Magic Wand

    $175.00
    Click here to see all Discovery workshop dates & times Prerequisite: None.  This is an introductory class. Suggested Skill Level: Beginner and up Date. July 28, 2024 Time: 2 PM -  6 PM Location: Adam's Forge Could you use more magic in your life?  If so, this is the workshop for you! Commercially mass-produced wands made of wood or resin will break with use, but a hand-forged wand will last forever. This super fun workshop is a great introduction to the forge and is suitable for more advanced students as well. Here, you will be guided in forging your own magic wand from a 3/8″ square bar. The instructor will demonstrate various design options, including different styles of twists and surface textures, and they’ll assist you as you create your own magic. Once your wand is made, your instructor will show you how to add an optional magical orb (otherwise known as a marble) to the top of the wand for extra special power. Finally, they will go over finishing options.
  • July 21, 2024

    Paring Knife

    $210.00
    Click here to see all Knife workshop dates and times Date: July 21, 2024 Time: 9 AM - 4 PM Location: Adam's Forge Instructor: Kent Lulewich Prerequisite: Letter Opener Discovery Class Suggested Skill Level: Beginner and up

    Join us to create a paring knife to use in the kitchen or take on your next picnic.   This is a high carbon steel knife made from 80CRV2 steel.

    We start by creating the handle section that you can size to fit your hand perfectly. Then the blade is forged and heat-treated. Lastly, we will grind it to the level of sharpness you desire.

    The handle will be cord wrapped for both comfort and durability. We will discuss other handle options you can try on your own.

    You will leave with a complete knife, ready to use.

    Tools: Students do not need to bring tools; we have everything that you will need. However, if you happen to have the following, please bring them so that you have the opportunity to use your own!

    Coarse files (i.e. 12 inch Heavy Duty Set from Harbor Freight)

    Tongs for ¼” x ¾” stock

    Class runs from 9am - 3pm with a one hour meal break. Please note: All classes are released for member-only early registration for one week before they're available for general registration.  If you're unable to add this class to your cart, you can wait for general release or join our membership program at any time!
  • August 04, 2024

    Discovery Letter Opener

    $175.00
    Click here to see all Discovery workshop dates & times Prerequisite: None. This is an introductory workshop Suggested skill level: Beginner and up Date: August 4, 2024 Time: 9 AM - 1 PM Location: Adam's Forge Not just a useful tool, but also the first step to all of your bladesmithing dreams, our Letter Opener is a Discovery workshop as well as a prerequisite for all of our blade workshops. The Letter Opener workshop is perfect as either an introductory or a follow-up course, as it introduces techniques that are useful in a wide range of blacksmithing projects. You’ll learn how to work with slightly larger stock, and be introduced to the proper choice and use of tongs to hold the hot steel. You’ll use the vise and a twisting wrench for the handle, and practice tapering and turning scrolls as well.  In forging the blade, you’ll learn about full-face and half-face hammer blows.  Finally, you can apply a hot wax finish to protect your letter opener. Don’t be afraid if that sounds like a lot; we’ll be there every step of the way to make sure you master all the skills you need.
  • August 04, 2024

    Discovery Chopsticks

    $175.00
    Click here to see all Discovery workshop dates & times Date: August 4, 2024 Time: 2 PM - 6 PM Location: Adam's Forge Prerequisites: None; this is an introductory workshop Our newest Discovery workshop is perfect for beginners and more experienced students alike. The project is simple, but leaves so much space for improvisation and creativity. If you want to see what you can really do, this is the workshop for you! Using 1/4” mild steel bar, our instructor will demonstrate tapering the stock to create a tool that balances neatly in your hand while in use. They’ll show you several different design options, from various twists to different punches you can use for texture as well as different types of finials.  Then you’ll move on to the little chopstick rests.  Here, you can really let your imagination lead the way!  From traditionally simple and elegant shapes to wild and wacky and everything in between, you’ll be free to create your own custom set, or maybe more if you’re swift. These also make great hair sticks, perfect for your own use, or if there is a certain long-haired person in your life you wish to impress.
  • August 09, 2024

    Forge Safety

    $125.00
    Prerequisite: Any Discovery Class  Please note, this class is required for all  Adam’s Forge members who wish to attend Open Forge sessions.    Date: August 9, 2024 Time: 6 pm - 10 pm Location: Adam's Forge

    This workshop is designed to introduce you to the best practices for safely using our shop equipment with an emphasis on power tools.  From the bandsaw, belt grinders, bench grinder & wire wheel to drill presses and how to safely shutdown the forges, our instructors will demonstrate proper use and guide you as you practice, learn, and finally demonstrate your ability to follow all the safety guidelines.

    Once you sign up, you’ll then take a series of online tests, which you must pass with a minimum of 85% prior to the start of your class.  Follow the online instructions to forward the test results to blacksmithclasses@gmail.com.  The on-site class is 4-hours in length and the class size is limited to 4 people.

    Please note: All workshops are released for member-only early registration for one week before they're available for general registration.  If you're unable to add this to your cart, you can wait for general release or join our membership program at any time!

  • August 10, 2024

    Discovery Letter Opener

    $175.00
    Click here to see all Discovery workshop dates & times Prerequisite: None. This is an introductory workshop Suggested skill level: Beginner and up Date: August 10, 2024 Time: 4 PM - 8 PM Location: Adam's Forge Not just a useful tool, but also the first step to all of your bladesmithing dreams, our Letter Opener is a Discovery workshop as well as a prerequisite for all of our blade workshops. The Letter Opener workshop is perfect as either an introductory or a follow-up course, as it introduces techniques that are useful in a wide range of blacksmithing projects. You’ll learn how to work with slightly larger stock, and be introduced to the proper choice and use of tongs to hold the hot steel. You’ll use the vise and a twisting wrench for the handle, and practice tapering and turning scrolls as well.  In forging the blade, you’ll learn about full-face and half-face hammer blows.  Finally, you can apply a hot wax finish to protect your letter opener. Don’t be afraid if that sounds like a lot; we’ll be there every step of the way to make sure you master all the skills you need.
  • August 24, 2024

    Discovery Bottle Opener

    $175.00
    Click here to see all Discovery workshop dates & times Prerequisite: None. This is an introductory class Suggested Skill Level: Beginner and up Date: August 24, 2024 Time: 9 AM - 1 PM Location: Adam's Forge Be the envy of all at your next social gathering, while you crack open everyone’s beverages with your new handy-dandy bottle opener, made by your own two hands! The Bottle Opener workshop is perfect as either an introductory or a follow-up course, as it introduces techniques that are useful in a wide range of blacksmithing projects.  You’ll learn how to work with slightly larger stock, and be introduced to the proper choice and use of tongs to hold the hot steel. You’ll use the vise and a twisting wrench for the handle, and practice tapering and turning scrolls as well.  In forging the handle, you’ll learn about shaping a square rod into an octagon, or if you prefer, a round, tapered bar.  Finally, you can apply a hot wax finish to protect your bottle opener. Don’t worry if that sounds intimidating, we promise that anyone can do it.
  • August 24, 2024

    Steel Rose

    $200.00
    Prerequisite: Discovery Class Date: August 24, 2024 Time: 2 PM - 8 PM Location: Adam's Forge Instructor: Amanda Kazarian Skill level: Seasoned beginner and up In this fun workshop students will forge a rose from steel sheet and attach it to a forged stem under the guidance of Adam's Forge instructor Amanda Kazarian.  Amanda will be teaching a whole set of new skills including sheet work, forging, forming and texturing the petals. Students will finish the day with a lovely rose that never wilts! Keep it for yourself or give it to a special person.  The prerequisite for this class is any Discovery class. A little more time with a hammer is useful but not required. This workshop runs for 6 hours, including a one hour meal break. The fee for this class includes 1 rose blank, additional blanks are available for purchase. Please note: All classes are released for member-only early registration for one week before they're available for general registration.  If you're unable to add this class to your cart, you can wait for general release or join our membership program at any time!    
  • August 25, 2024

    Discovery Letter Opener

    $175.00
    Click here to see all Discovery workshop dates & times Prerequisite: None. This is an introductory workshop Suggested skill level: Beginner and up Date: August 25, 2024 Time: 2 PM - 6 PM Location: Adam's Forge Not just a useful tool, but also the first step to all of your bladesmithing dreams, our Letter Opener is a Discovery workshop as well as a prerequisite for all of our blade workshops. The Letter Opener workshop is perfect as either an introductory or a follow-up course, as it introduces techniques that are useful in a wide range of blacksmithing projects. You’ll learn how to work with slightly larger stock, and be introduced to the proper choice and use of tongs to hold the hot steel. You’ll use the vise and a twisting wrench for the handle, and practice tapering and turning scrolls as well.  In forging the blade, you’ll learn about full-face and half-face hammer blows.  Finally, you can apply a hot wax finish to protect your letter opener. Don’t be afraid if that sounds like a lot; we’ll be there every step of the way to make sure you master all the skills you need.
  • August 22, 2024

    Forge Safety

    $125.00
    Prerequisite: Any Discovery Class  Please note, this class is required for all  Adam’s Forge members who wish to attend Open Forge sessions.    Date: August 22, 2024 Time: 6 pm - 10 pm Location: Adam's Forge

    This workshop is designed to introduce you to the best practices for safely using our shop equipment with an emphasis on power tools.  From the bandsaw, belt grinders, bench grinder & wire wheel to drill presses and how to safely shutdown the forges, our instructors will demonstrate proper use and guide you as you practice, learn, and finally demonstrate your ability to follow all the safety guidelines.

    Once you sign up, you’ll then take a series of online tests, which you must pass with a minimum of 85% prior to the start of your class.  Follow the online instructions to forward the test results to blacksmithclasses@gmail.com.  The on-site class is 4-hours in length and the class size is limited to 4 people.

    Please note: All workshops are released for member-only early registration for one week before they're available for general registration.  If you're unable to add this to your cart, you can wait for general release or join our membership program at any time!

  • September 01, 2024

    Discovery Bottle Opener

    $175.00
    Click here to see all Discovery workshop dates & times Prerequisite: None. This is an introductory class Suggested Skill Level: Beginner and up Date: September 1, 2024 Time: 4 PM - 8 PM Location: Adam's Forge Be the envy of all at your next social gathering, while you crack open everyone’s beverages with your new handy-dandy bottle opener, made by your own two hands! The Bottle Opener workshop is perfect as either an introductory or a follow-up course, as it introduces techniques that are useful in a wide range of blacksmithing projects.  You’ll learn how to work with slightly larger stock, and be introduced to the proper choice and use of tongs to hold the hot steel. You’ll use the vise and a twisting wrench for the handle, and practice tapering and turning scrolls as well.  In forging the handle, you’ll learn about shaping a square rod into an octagon, or if you prefer, a round, tapered bar.  Finally, you can apply a hot wax finish to protect your bottle opener. Don’t worry if that sounds intimidating, we promise that anyone can do it.
  • September 05, 2024

    Forge Safety

    $125.00
    Prerequisite: Any Discovery Class  Please note, this class is required for all  Adam’s Forge members who wish to attend Open Forge sessions.    Date: September 5, 2024 Time: 6 pm - 10 pm Location: Adam's Forge

    This workshop is designed to introduce you to the best practices for safely using our shop equipment with an emphasis on power tools.  From the bandsaw, belt grinders, bench grinder & wire wheel to drill presses and how to safely shutdown the forges, our instructors will demonstrate proper use and guide you as you practice, learn, and finally demonstrate your ability to follow all the safety guidelines.

    Once you sign up, you’ll then take a series of online tests, which you must pass with a minimum of 85% prior to the start of your class.  Follow the online instructions to forward the test results to blacksmithclasses@gmail.com.  The on-site class is 4-hours in length and the class size is limited to 4 people.

    Please note: All workshops are released for member-only early registration for one week before they're available for general registration.  If you're unable to add this to your cart, you can wait for general release or join our membership program at any time!

  • September 08, 2024

    Discovery Letter Opener

    $175.00
    Click here to see all Discovery workshop dates & times Prerequisite: None. This is an introductory workshop Suggested skill level: Beginner and up Date: September 8, 2024 Time: 9 AM - 1 PM Location: Adam's Forge Not just a useful tool, but also the first step to all of your bladesmithing dreams, our Letter Opener is a Discovery workshop as well as a prerequisite for all of our blade workshops. The Letter Opener workshop is perfect as either an introductory or a follow-up course, as it introduces techniques that are useful in a wide range of blacksmithing projects. You’ll learn how to work with slightly larger stock, and be introduced to the proper choice and use of tongs to hold the hot steel. You’ll use the vise and a twisting wrench for the handle, and practice tapering and turning scrolls as well.  In forging the blade, you’ll learn about full-face and half-face hammer blows.  Finally, you can apply a hot wax finish to protect your letter opener. Don’t be afraid if that sounds like a lot; we’ll be there every step of the way to make sure you master all the skills you need.
  • September 14, 2024

    Resurrecting Relics

    $200.00
    Click here to see all Knife workshop dates and times Date: September 14, 2024 Time: 9 AM - 3 PM Location: Adam's Forge Instructor: Will Larranaga Prerequisite: Letter Opener Discovery Class.  The more experienced smith will get more out of this workshop. Suggested Skill Level: Beginner and up

     Join us for a refreshing workshop centered around used, found, vintage, and salvaged materials. The focus of this class is not around finishing a project, but methods and best practices when using found materials. From old tools to rebar and leaf springs, it's all useful and begging to be turned into something new. Turn that old pipe wrench in your garage into an interesting new knife that will be a great talking piece! Reforge some of that leaf spring that you have laying around into a new hot punching set for your next blacksmithing project! The possibilities will surprise you and the skills you take away from this workshop will be useful in many different blade or tool forging applications.

    In this workshop we will discuss safety issues that must be taken into consideration with any steel that is old or used as well as heat treatment of steels that are not known to us. We will then demonstrate safe preparation of our steel prior to forging. This will be followed by a hot forging demonstration on bringing an old tool to life to become a working tool.

    This workshop will be taught with an emphasis on blades but we also encourage participants to explore other types of tooling and can guide those that wish to make tools. This class is best for beginner to seasoned smiths that want to try to expand their materials knowledge, heat treatment, and creativity.

    Participants are encouraged to bring in tools and found materials if they wish, however they are not required as we will also provide plenty for students to pick and choose from.

    Class runs from 9am - 3pm with a one hour meal break. Please note: All classes are released for member-only early registration for one week before they're available for general registration.  If you're unable to add this class to your cart, you can wait for general release or join our membership program at any time!
  • September 15, 2024

    Discovery Magic Wand

    $175.00
    Click here to see all Discovery workshop dates & times Prerequisite: None.  This is an introductory class. Suggested Skill Level: Beginner and up Date. September 15, 2024 Time: 5 PM -  9 PM Location: Adam's Forge Could you use more magic in your life?  If so, this is the workshop for you! Commercially mass-produced wands made of wood or resin will break with use, but a hand-forged wand will last forever. This super fun workshop is a great introduction to the forge and is suitable for more advanced students as well. Here, you will be guided in forging your own magic wand from a 3/8″ square bar. The instructor will demonstrate various design options, including different styles of twists and surface textures, and they’ll assist you as you create your own magic. Once your wand is made, your instructor will show you how to add an optional magical orb (otherwise known as a marble) to the top of the wand for extra special power. Finally, they will go over finishing options.
  • September 19, 2024

    Forge Safety

    $125.00
    Prerequisite: Any Discovery Class  Please note, this class is required for all  Adam’s Forge members who wish to attend Open Forge sessions.    Date: September 19, 2024 Time: 6 pm - 10 pm Location: Adam's Forge

    This workshop is designed to introduce you to the best practices for safely using our shop equipment with an emphasis on power tools.  From the bandsaw, belt grinders, bench grinder & wire wheel to drill presses and how to safely shutdown the forges, our instructors will demonstrate proper use and guide you as you practice, learn, and finally demonstrate your ability to follow all the safety guidelines.

    Once you sign up, you’ll then take a series of online tests, which you must pass with a minimum of 85% prior to the start of your class.  Follow the online instructions to forward the test results to blacksmithclasses@gmail.com.  The on-site class is 4-hours in length and the class size is limited to 4 people.

    Please note: All workshops are released for member-only early registration for one week before they're available for general registration.  If you're unable to add this to your cart, you can wait for general release or join our membership program at any time!

  • September 21, 2024

    Discovery Bottle Opener

    $175.00
    Click here to see all Discovery workshop dates & times Prerequisite: None. This is an introductory class Suggested Skill Level: Beginner and up Date: September 21, 2024 Time: 4 PM - 8 PM Location: Adam's Forge Be the envy of all at your next social gathering, while you crack open everyone’s beverages with your new handy-dandy bottle opener, made by your own two hands! The Bottle Opener workshop is perfect as either an introductory or a follow-up course, as it introduces techniques that are useful in a wide range of blacksmithing projects.  You’ll learn how to work with slightly larger stock, and be introduced to the proper choice and use of tongs to hold the hot steel. You’ll use the vise and a twisting wrench for the handle, and practice tapering and turning scrolls as well.  In forging the handle, you’ll learn about shaping a square rod into an octagon, or if you prefer, a round, tapered bar.  Finally, you can apply a hot wax finish to protect your bottle opener. Don’t worry if that sounds intimidating, we promise that anyone can do it.
  • September 22, 2024

    Discovery Letter Opener

    $175.00
    Click here to see all Discovery workshop dates & times Prerequisite: None. This is an introductory workshop Suggested skill level: Beginner and up Date: September 22, 2024 Time: 9 AM - 1 PM Location: Adam's Forge Not just a useful tool, but also the first step to all of your bladesmithing dreams, our Letter Opener is a Discovery workshop as well as a prerequisite for all of our blade workshops. The Letter Opener workshop is perfect as either an introductory or a follow-up course, as it introduces techniques that are useful in a wide range of blacksmithing projects. You’ll learn how to work with slightly larger stock, and be introduced to the proper choice and use of tongs to hold the hot steel. You’ll use the vise and a twisting wrench for the handle, and practice tapering and turning scrolls as well.  In forging the blade, you’ll learn about full-face and half-face hammer blows.  Finally, you can apply a hot wax finish to protect your letter opener. Don’t be afraid if that sounds like a lot; we’ll be there every step of the way to make sure you master all the skills you need.
  • September 28, 2024

    Discovery Letter Opener

    $175.00
    Click here to see all Discovery workshop dates & times Prerequisite: None. This is an introductory workshop Suggested skill level: Beginner and up Date: September 28, 2024 Time: 9 AM - 1 PM Location: Adam's Forge Not just a useful tool, but also the first step to all of your bladesmithing dreams, our Letter Opener is a Discovery workshop as well as a prerequisite for all of our blade workshops. The Letter Opener workshop is perfect as either an introductory or a follow-up course, as it introduces techniques that are useful in a wide range of blacksmithing projects. You’ll learn how to work with slightly larger stock, and be introduced to the proper choice and use of tongs to hold the hot steel. You’ll use the vise and a twisting wrench for the handle, and practice tapering and turning scrolls as well.  In forging the blade, you’ll learn about full-face and half-face hammer blows.  Finally, you can apply a hot wax finish to protect your letter opener. Don’t be afraid if that sounds like a lot; we’ll be there every step of the way to make sure you master all the skills you need.
  • September 29, 2024

    Discovery BBQ Tool

    $175.00
    Click here to see all Discovery workshop dates & times Prerequisite: None. This is the first workshop to take. Suggested skill level: Beginner and up Date: September 29, 2024 Time: 9 AM  - 1 PM Location: Adam's Forge Are you a grill master? Do your weekends revolve around the smoking of various proteins? Do you live and breathe charcoal and fire? Then there’s one thing your rig needs: your very own, hand-made BBQ tool, forged in fire five times hotter than any grill. This workshop is perfect for beginners. Because you’re working with longer steel, you can mostly use your hands instead of tongs, which means you can focus on learning the basics of hammering and temperature control without having to also focus on manipulating the tongs. For more experienced blacksmiths, there’s lots of opportunity to experiment with different techniques. And best of all, you’ll go home with your very own, one-of-a-kind BBQ tool! Sound complicated? We promise it’s not. We’ll teach you everything you need to know.
  • September 28, 2024 - September 29, 2024

    Introduction to Damascus Steel

    $650.00
    Click here to see all Knife workshop dates and times Dates & Times: September 28, 2024 from 2:00pm - 10:00pm September 29, 2024 from 2:00pm - 8:00pm Students must attend both days. Location: Adam's Forge Instructor: Dossain Valencia Prerequisites: Any Discovery workshop plus a Power Hammer Safety Workshop.  Previous experience with forge welding is recommended. Suggested Skill Level: Seasoned beginner and up. Participants should have solid blacksmithing skills and be confident using hand tools before moving to the power hammer. In this workshop, Adam's Forge lead instructor Dossain Valencia will guide you in making a pattern-welded Damascus billet using contrasting high carbon steels.  You'll gain instruction in preparing the billets, forge welding, and working with the power hammers & hydraulic press to draw them out.  The process will be repeated several times to increase the number of layers.  Finally, preliminary etching to reveal the pattern will be addressed, followed by a discussion of possible uses as well as tips on working with Damascus for future projects. This workshop will run for 8 hours on day 1 and 6 hours on day 2 with an hour meal break. Please note: the first week that registration for this workshop is open, spots may only be purchased by members. If you find you are unable to register, please check back after that first week has passed, or consider becoming a member of Adam’s Forge. All proceeds go towards supporting our amazing organization, and membership will bring you exclusive events and opportunities, along with a community of other blacksmiths!    
  • October 05, 2024

    Forge Safety

    $125.00
    Prerequisite: Any Discovery Class  Please note, this class is required for all  Adam’s Forge members who wish to attend Open Forge sessions.    Date: October 5, 2024 Time: 3:30 pm - 7:30 pm Location: Adam's Forge

    This workshop is designed to introduce you to the best practices for safely using our shop equipment with an emphasis on power tools.  From the bandsaw, belt grinders, bench grinder & wire wheel to drill presses and how to safely shutdown the forges, our instructors will demonstrate proper use and guide you as you practice, learn, and finally demonstrate your ability to follow all the safety guidelines.

    Once you sign up, you’ll then take a series of online tests, which you must pass with a minimum of 85% prior to the start of your class.  Follow the online instructions to forward the test results to blacksmithclasses@gmail.com.  The on-site class is 4-hours in length and the class size is limited to 4 people.

    Please note: All workshops are released for member-only early registration for one week before they're available for general registration.  If you're unable to add this to your cart, you can wait for general release or join our membership program at any time!

  • October 06, 2024

    Discovery Letter Opener

    $175.00
    Click here to see all Discovery workshop dates & times Prerequisite: None. This is an introductory workshop Suggested skill level: Beginner and up Date: October 6, 2024 Time: 9 AM - 1 PM Location: Adam's Forge Not just a useful tool, but also the first step to all of your bladesmithing dreams, our Letter Opener is a Discovery workshop as well as a prerequisite for all of our blade workshops. The Letter Opener workshop is perfect as either an introductory or a follow-up course, as it introduces techniques that are useful in a wide range of blacksmithing projects. You’ll learn how to work with slightly larger stock, and be introduced to the proper choice and use of tongs to hold the hot steel. You’ll use the vise and a twisting wrench for the handle, and practice tapering and turning scrolls as well.  In forging the blade, you’ll learn about full-face and half-face hammer blows.  Finally, you can apply a hot wax finish to protect your letter opener. Don’t be afraid if that sounds like a lot; we’ll be there every step of the way to make sure you master all the skills you need.
  • October 12, 2024

    Discovery Letter Opener

    $175.00
    Click here to see all Discovery workshop dates & times Prerequisite: None. This is an introductory workshop Suggested skill level: Beginner and up Date: October 12, 2024 Time: 6 PM - 10 PM Location: Adam's Forge Not just a useful tool, but also the first step to all of your bladesmithing dreams, our Letter Opener is a Discovery workshop as well as a prerequisite for all of our blade workshops. The Letter Opener workshop is perfect as either an introductory or a follow-up course, as it introduces techniques that are useful in a wide range of blacksmithing projects. You’ll learn how to work with slightly larger stock, and be introduced to the proper choice and use of tongs to hold the hot steel. You’ll use the vise and a twisting wrench for the handle, and practice tapering and turning scrolls as well.  In forging the blade, you’ll learn about full-face and half-face hammer blows.  Finally, you can apply a hot wax finish to protect your letter opener. Don’t be afraid if that sounds like a lot; we’ll be there every step of the way to make sure you master all the skills you need.
  • October 13, 2024

    Discovery Bottle Opener

    $175.00
    Click here to see all Discovery workshop dates & times Prerequisite: None. This is an introductory class Suggested Skill Level: Beginner and up Date: October 13, 2024 Time: 6 PM - 10 PM Location: Adam's Forge Be the envy of all at your next social gathering, while you crack open everyone’s beverages with your new handy-dandy bottle opener, made by your own two hands! The Bottle Opener workshop is perfect as either an introductory or a follow-up course, as it introduces techniques that are useful in a wide range of blacksmithing projects.  You’ll learn how to work with slightly larger stock, and be introduced to the proper choice and use of tongs to hold the hot steel. You’ll use the vise and a twisting wrench for the handle, and practice tapering and turning scrolls as well.  In forging the handle, you’ll learn about shaping a square rod into an octagon, or if you prefer, a round, tapered bar.  Finally, you can apply a hot wax finish to protect your bottle opener. Don’t worry if that sounds intimidating, we promise that anyone can do it.
  • October 17, 2024

    Forge Safety

    $125.00
    Prerequisite: Any Discovery Class  Please note, this class is required for all  Adam’s Forge members who wish to attend Open Forge sessions.    Date: October 17, 2024 Time: 6 pm - 10 pm Location: Adam's Forge

    This workshop is designed to introduce you to the best practices for safely using our shop equipment with an emphasis on power tools.  From the bandsaw, belt grinders, bench grinder & wire wheel to drill presses and how to safely shutdown the forges, our instructors will demonstrate proper use and guide you as you practice, learn, and finally demonstrate your ability to follow all the safety guidelines.

    Once you sign up, you’ll then take a series of online tests, which you must pass with a minimum of 85% prior to the start of your class.  Follow the online instructions to forward the test results to blacksmithclasses@gmail.com.  The on-site class is 4-hours in length and the class size is limited to 4 people.

    Please note: All workshops are released for member-only early registration for one week before they're available for general registration.  If you're unable to add this to your cart, you can wait for general release or join our membership program at any time!

  • October 19, 2024

    Discovery Letter Opener

    $175.00
    Click here to see all Discovery workshop dates & times Prerequisite: None. This is an introductory workshop Suggested skill level: Beginner and up Date: October 19, 2024 Time: 9 AM - 1 PM Location: Adam's Forge Not just a useful tool, but also the first step to all of your bladesmithing dreams, our Letter Opener is a Discovery workshop as well as a prerequisite for all of our blade workshops. The Letter Opener workshop is perfect as either an introductory or a follow-up course, as it introduces techniques that are useful in a wide range of blacksmithing projects. You’ll learn how to work with slightly larger stock, and be introduced to the proper choice and use of tongs to hold the hot steel. You’ll use the vise and a twisting wrench for the handle, and practice tapering and turning scrolls as well.  In forging the blade, you’ll learn about full-face and half-face hammer blows.  Finally, you can apply a hot wax finish to protect your letter opener. Don’t be afraid if that sounds like a lot; we’ll be there every step of the way to make sure you master all the skills you need.
  • October 20, 2024

    Skeleton Bottle Opener

    $200.00
    Prerequisite: Any Discovery Class or Letter Opener class Date: October 20, 2024 Time: 9 AM - 3 PM Location: Adam's Forge

    Today we will make a ghoulish tool for the kitchen or any party. We’ll forge this from mild steel and apply a wax finish.

    The project starts by drawing out the steel as you did in the Discovery Day Class. This taper will be bent around and back to create a bottle opener.

    Then the fun begins as we form the skeleton. We start by using a guillotine tool (how appropriate) to form the neck and waist. Then we work on the face and chest.  You’ll have plenty of opportunity to make it your own.

    Once formed, a wax finish is applied to protect the steel from kitchen abuse.

    Much fun to be had by all and you will have a tool that you’ll definitely want to make again and again, as gifts for all your friends.

    Skills learned: Tapers, bending over the horn, using tooling for decoration, and finishing.

    Please note: All classes are released for member-only early registration for one week before they're available for general registration.  If you're unable to add this class to your cart, you can wait for general release or join our membership program at any time!

  • October 20, 2024

    Discovery Chopsticks

    $175.00
    Click here to see all Discovery workshop dates & times Date: October 20, 2024 Time: 4 PM - 8 PM Location: Adam's Forge Prerequisites: None; this is an introductory workshop Our newest Discovery workshop is perfect for beginners and more experienced students alike. The project is simple, but leaves so much space for improvisation and creativity. If you want to see what you can really do, this is the workshop for you! Using 1/4” mild steel bar, our instructor will demonstrate tapering the stock to create a tool that balances neatly in your hand while in use. They’ll show you several different design options, from various twists to different punches you can use for texture as well as different types of finials.  Then you’ll move on to the little chopstick rests.  Here, you can really let your imagination lead the way!  From traditionally simple and elegant shapes to wild and wacky and everything in between, you’ll be free to create your own custom set, or maybe more if you’re swift. These also make great hair sticks, perfect for your own use, or if there is a certain long-haired person in your life you wish to impress.
  • October 26, 2024

    Discovery Magic Wand

    $175.00
    Click here to see all Discovery workshop dates & times Prerequisite: None.  This is an introductory class. Suggested Skill Level: Beginner and up Date. October 26, 2024 Time: 4 PM -  8 PM Location: Adam's Forge Could you use more magic in your life?  If so, this is the workshop for you! Commercially mass-produced wands made of wood or resin will break with use, but a hand-forged wand will last forever. This super fun workshop is a great introduction to the forge and is suitable for more advanced students as well. Here, you will be guided in forging your own magic wand from a 3/8″ square bar. The instructor will demonstrate various design options, including different styles of twists and surface textures, and they’ll assist you as you create your own magic. Once your wand is made, your instructor will show you how to add an optional magical orb (otherwise known as a marble) to the top of the wand for extra special power. Finally, they will go over finishing options.
  • October 27, 2024

    Discovery Letter Opener

    $175.00
    Click here to see all Discovery workshop dates & times Prerequisite: None. This is an introductory workshop Suggested skill level: Beginner and up Date: October 27, 2024 Time: 9 AM - 1 PM Location: Adam's Forge Not just a useful tool, but also the first step to all of your bladesmithing dreams, our Letter Opener is a Discovery workshop as well as a prerequisite for all of our blade workshops. The Letter Opener workshop is perfect as either an introductory or a follow-up course, as it introduces techniques that are useful in a wide range of blacksmithing projects. You’ll learn how to work with slightly larger stock, and be introduced to the proper choice and use of tongs to hold the hot steel. You’ll use the vise and a twisting wrench for the handle, and practice tapering and turning scrolls as well.  In forging the blade, you’ll learn about full-face and half-face hammer blows.  Finally, you can apply a hot wax finish to protect your letter opener. Don’t be afraid if that sounds like a lot; we’ll be there every step of the way to make sure you master all the skills you need.
  • October 11, 2024 - October 14, 2024

    Frontier Belt Knife

    $750.00
    Click here to see all Knife workshop dates and times Date: October 11, 12, 13 & 14 Time: 9 AM - 5 PM Location: Adam's Forge Prerequisites: Letter Opener Discovery plus Introduction to Bladesmithing or 2-3 of our blade classes or equivalent.
    Skill Level: Seasoned beginner and up.
    This workshop is for the Frontier Belt Knife only.  If you'd like to make your own custom leather sheath, you can sign up here. Please note: This class takes place over four consecutive morning/afternoon classes.

    Friday 10/11/24 through Monday (Federal Holiday) 10/14/24 from 9:00am - 5:00pm

    Students must attend all sessions.

    Whether you're horseback riding up in the rugged Yukon or the foothills of the Sierras, you'll want to make sure you have this Bowie belt knife by your side. Nothing says adventure and exploration like this extensive knife course to bring your skill set on par with blacksmiths from Early America. If you are a serious survivalist, camper, outdoorsman, or into bushcraft, then this class is tailor made for you. Take it with you wherever you decide to go and know you have a piece forged by you that can stand up to the rigors of untamed nature.

    Come to Adam’s Forge to make your own knife inspired by those the pioneer hunters in early America would have carried alongside them into the unknown wilderness. Over this four-day workshop, students will forge out their own knives.

    Students should be familiar with blade forging processes and have prior prerequisites met to get the most out of this class. Attention to detail on hand hammer techniques to end with a knife that is as close as we can get it to final dimensions is the name of the game.

    These workshops are 8 hours long with an hour meal break.

    Please note: All classes are released for member-only early registration for one week before they're available for general registration.  If you're unable to add this class to your cart, you can wait for general release or join our membership program at any time!

  • October 27, 2024

    Skull Necklace

    $175.00
    Date: October 27, 2024 Time: 2 PM - 8 PM Location: Adam's Forge Prerequisite: Discovery class or Letter Opener class Halloween is here and Dia De Los Muertos is nipping at its heels. Best be properly attired! On this day, Adam's Forge instructor Gary Standke will take you down a dark and winding path into the heart of the forge where you will make iron skulls and create a necklace, amulet, talisman or just plain scary thingy.  We will go over tooling required, shaping the iron, using custom made punches and fullers for the facial features, options for giving it the look you want and finishing techniques.  Finally you'll create the string and hardware for the necklace. You'll practice the technical skills of tapering, hot cutting, slitting, punching, grinding and necklace fabrication.  At the same time, you'll also be sculpting hot metal and assessing your progress as you work. This class runs from 2:00 PM to 8:00PM with a break for lunch.
  • August 31, 2024

    Copper Bowl: Variations

    $200.00
    Prerequisite: Any Discovery Class Date: August 31, 2024 Time: 10 AM - 4 PM Location: Adam's Forge Instructor: Heather McLarty
    In this workshop, you’ll make a copper bowl from scratch.  Adam’s Forge Artist-Blacksmith Heather McLarty will guide you through the layout, cutting and dressing of the copper blanks.  She'll demonstrate sinking (forming) techniques using a variety of different methods.  You'll be introduced to the concepts of work hardening, annealing, and planning your work so that the finished piece is rigid and strong.  And he’ll demonstrate different tools and techniques to add texture to the work. Those with previous experience working with copper will have the opportunity to try some new techniques and expand the range of design possibilities.
    You’ll go home with a new set of skills and one-of-a-kind bowl you can cherish forever.  And it will be shiny too!
    We’ll provide all the tools and materials you need to complete your signature piece.  However, if you have your own tools, feel free to bring them.
    This workshop runs for 6 hours with an hour meal break.
    Please note: All classes are released for member-only early registration for one week before they're available for general registration.  If you're unable to add this class to your cart, you can wait for general release or join our membership program at any time!    
  • November 03, 2024

    Discovery Letter Opener

    $175.00
    Click here to see all Discovery workshop dates & times Prerequisite: None. This is an introductory workshop Suggested skill level: Beginner and up Date: November 3, 2024 Time: 9 AM - 1 PM Location: Adam's Forge Not just a useful tool, but also the first step to all of your bladesmithing dreams, our Letter Opener is a Discovery workshop as well as a prerequisite for all of our blade workshops. The Letter Opener workshop is perfect as either an introductory or a follow-up course, as it introduces techniques that are useful in a wide range of blacksmithing projects. You’ll learn how to work with slightly larger stock, and be introduced to the proper choice and use of tongs to hold the hot steel. You’ll use the vise and a twisting wrench for the handle, and practice tapering and turning scrolls as well.  In forging the blade, you’ll learn about full-face and half-face hammer blows.  Finally, you can apply a hot wax finish to protect your letter opener. Don’t be afraid if that sounds like a lot; we’ll be there every step of the way to make sure you master all the skills you need.

Title

Go to Top