• February 25, 2024

    Discovery Bottle Opener

    $175.00
    Prerequisite: None. This is an introductory class Suggested Skill Level: Beginner and up Date: February 25, 2024 Time: 9 AM - 1 PM Location: Adam's Forge Be the envy of all at your next social gathering, while you crack open everyone’s beverages with your new handy-dandy bottle opener, made by your own two hands! The Bottle Opener workshop is perfect as either an introductory or a follow-up course, as it introduces techniques that are useful in a wide range of blacksmithing projects.  You’ll learn how to work with slightly larger stock, and be introduced to the proper choice and use of tongs to hold the hot steel. You’ll use the vise and a twisting wrench for the handle, and practice tapering and turning scrolls as well.  In forging the handle, you’ll learn about shaping a square rod into an octagon, or if you prefer, a round, tapered bar.  Finally, you can apply a hot wax finish to protect your bottle opener. Don’t worry if that sounds intimidating, we promise that anyone can do it. Please note: the first week that registration for this workshop is open, spots may only be purchased by members. If you find you are unable to register, please check back after that first week has passed, or consider becoming a member of Adam’s Forge. All proceeds go towards supporting our amazing organization, and membership will bring you exclusive events and opportunities, along with a community of other blacksmiths!

         
  • February 25, 2024

    Open Forge

    $60.00
    Prerequisite: Any Discovery Class and Adam's Forge Membership  Please note: Beginning on January 1, 2024, all attendees of Open Forge sessions must have successfully passed the Forge Safety class, which is free to members and available for sign-up on the class calendar. Can't add this workshop to your cart? You can join the Membership Program here   Date: February 25, 2024 Time: 2 pm - 6 pm Location: Adam's Forge Not a class, but a swell time to get in the forge to do what you wanna do. You can bring your own material and work on your own project. This can be a chance to finish that piece you started or work out a technique you’ve been meaning to try. One of our intrepid instructors will be on hand for supervision and guidance, although these are not teaching workshops. Please note: these sessions are intended to support our students as they practice skills that are within their ability range.  Please do not use our forge and tools to experiment with new techniques that are beyond your skill level.  When in doubt, ask the instructor. As with all of our workshops, we require that students attending Open Forge sessions be at least 12 years old. A student who is not an adult (18 and older) will need to have a parent or guardian present at ALL times during the session. Thanks for thinking of safety first. Bring your own steel OR we have steel for sale at the forge: 1/4" square 3/8" square and round 1/2" square and round Sold by the foot sucker rod (higher carbon steel) sold in 7" sections You must have taken at least one Discovery class from us and be familiar with working safely.
  • February 27, 2024

    Forge Safety

    $125.00
    Prerequisite: Any Discovery Class  Please note, this class is required for all  Adam’s Forge members who wish to attend Open Forge sessions and is free of charge to members. Date: February 27, 2024 Time: 6 pm - 10 pm Location: Adam's Forge

    This workshop is designed to introduce you to the best practices for safely using our shop equipment with an emphasis on power tools.  From the bandsaw, belt grinders, bench grinder & wire wheel to drill presses and how to safely shutdown the forges, our instructors will demonstrate proper use and guide you as you practice, learn, and finally demonstrate your ability to follow all the safety guidelines.

    Once you sign up, you’ll then take a series of online tests, which you must pass with a minimum of 85% prior to the start of your class.  Follow the online instructions to forward the test results to blacksmithclasses@gmail.com.  The on-site class is 4-hours in length and the class size is limited to 4 people.

    Please note: All workshops are released for member-only early registration for one week before they're available for general registration.  If you're unable to add this to your cart, you can wait for general release or join our membership program at any time!

  • February 25, 2024

    Layered Pendant

    $190.00
    Prerequisite: None. This is an introductory workshop Suggested skill level: Beginner and up Date: February 25, 2024 Time: 10 AM - 4 PM including an hour lunch break Location: Adam's Forge
    Adam’s Forge is delighted to partner with Metal Artist Chloe Kono aka Chloeography in offering a jewelry making workshop.  Chloe holds a Bachelor of Fine Arts degree from California State University Long Beach and has been creating metal art for over a decade.  Her aesthetic ranges from clever, humorous, and whimsical, to luminous heirloom pieces.
    In this workshop, you’ll design and create a layered pendant with simple sheet metal fabrication! Students will learn about the basic jewelry making hand tools, the nature of non-ferrous metals, and foundational techniques including sawing, texturing, riveting, and finishing.
    If you have a design that you’d like to make, it should be approximately between 1 and 2 inches overall.  Chloe will have designs on hand for you to try, or you can improvise on the day!
    Class fee includes raw materials and access to all tools and equipment needed to finish the project.
    Optional: Sterling Silver Sheet (3x3, 22g) is available for purchase if students would like an upgrade.
    Please note: the first week that registration for this workshop is open, spots may only be purchased by members. If you find you are unable to register, please check back after that first week has passed, or consider becoming a member of Adam’s Forge. All proceeds go towards supporting our amazing organization, and membership will bring you exclusive events and opportunities, along with a community of other blacksmiths!

       
  • March 03, 2024

    Private Discovery Letter Opener

    $1,800.00
    Prerequisite: None. This is an introductory workshop Suggested skill level: Beginner and up Date: March 3, 2024 Time: 9 AM - 1 PM Location: Adam's Forge Not just a useful tool, but also the first step to all of your bladesmithing dreams, our Letter Opener is a Discovery workshop as well as a prerequisite for all of our blade workshops. The Letter Opener workshop is perfect as either an introductory or a follow-up course, as it introduces techniques that are useful in a wide range of blacksmithing projects. You’ll learn how to work with slightly larger stock, and be introduced to the proper choice and use of tongs to hold the hot steel. You’ll use the vise and a twisting wrench for the handle, and practice tapering and turning scrolls as well.  In forging the blade, you’ll learn about full-face and half-face hammer blows.  Finally, you can apply a hot wax finish to protect your letter opener. Don’t be afraid if that sounds like a lot; we’ll be there every step of the way to make sure you master all the skills you need.      
  • March 09, 2024

    Discovery BBQ Tool

    $175.00
    Prerequisite: None. This is the first workshop to take. Suggested skill level: Beginner and up Date: March 9, 2024 Time: 4 PM  - 8 PM Location: Adam's Forge Are you a grill master? Do your weekends revolve around the smoking of various proteins? Do you live and breathe charcoal and fire? Then there’s one thing your rig needs: your very own, hand-made BBQ tool, forged in fire five times hotter than any grill. This workshop is perfect for beginners. Because you’re working with longer steel, you can mostly use your hands instead of tongs, which means you can focus on learning the basics of hammering and temperature control without having to also focus on manipulating the tongs. For more experienced blacksmiths, there’s lots of opportunity to experiment with different techniques. And best of all, you’ll go home with your very own, one-of-a-kind BBQ tool! Sound complicated? We promise it’s not. We’ll teach you everything you need to know. Please note: the first week that registration for this workshop is open, spots may only be purchased by members. If you find you are unable to register, please check back after that first week has passed, or consider becoming a member of Adam’s Forge. All proceeds go towards supporting our amazing organization, and membership will bring you exclusive events and opportunities, along with a community of other blacksmiths!

  • March 12, 2024

    Forge Safety

    $125.00
    Prerequisite: Any Discovery Class  Please note, this class is required for all  Adam’s Forge members who wish to attend Open Forge sessions.    Date: March 12, 2024 Time: 6 pm - 10 pm Location: Adam's Forge

    This workshop is designed to introduce you to the best practices for safely using our shop equipment with an emphasis on power tools.  From the bandsaw, belt grinders, bench grinder & wire wheel to drill presses and how to safely shutdown the forges, our instructors will demonstrate proper use and guide you as you practice, learn, and finally demonstrate your ability to follow all the safety guidelines.

    Once you sign up, you’ll then take a series of online tests, which you must pass with a minimum of 85% prior to the start of your class.  Follow the online instructions to forward the test results to blacksmithclasses@gmail.com.  The on-site class is 4-hours in length and the class size is limited to 4 people.

    Please note: All workshops are released for member-only early registration for one week before they're available for general registration.  If you're unable to add this to your cart, you can wait for general release or join our membership program at any time!

  • March 23, 2024

    Discovery Letter Opener

    $175.00
    Prerequisite: None. This is an introductory workshop Suggested skill level: Beginner and up Date: March 23, 2024 Time: 9 AM - 1 PM Location: Adam's Forge Not just a useful tool, but also the first step to all of your bladesmithing dreams, our Letter Opener is a Discovery workshop as well as a prerequisite for all of our blade workshops. The Letter Opener workshop is perfect as either an introductory or a follow-up course, as it introduces techniques that are useful in a wide range of blacksmithing projects. You’ll learn how to work with slightly larger stock, and be introduced to the proper choice and use of tongs to hold the hot steel. You’ll use the vise and a twisting wrench for the handle, and practice tapering and turning scrolls as well.  In forging the blade, you’ll learn about full-face and half-face hammer blows.  Finally, you can apply a hot wax finish to protect your letter opener. Don’t be afraid if that sounds like a lot; we’ll be there every step of the way to make sure you master all the skills you need. Please note: the first week that registration for this workshop is open, spots may only be purchased by members. If you find you are unable to register, please check back after that first week has passed, or consider becoming a member of Adam’s Forge. All proceeds go towards supporting our amazing organization, and membership will bring you exclusive events and opportunities, along with a community of other blacksmiths!

       
  • March 29, 2024

    Forge Safety

    $125.00
    Prerequisite: Any Discovery Class  Please note, this class is required for all  Adam’s Forge members who wish to attend Open Forge sessions.    Date: March 29, 2024 Time: 6 pm - 10 pm Location: Adam's Forge

    This workshop is designed to introduce you to the best practices for safely using our shop equipment with an emphasis on power tools.  From the bandsaw, belt grinders, bench grinder & wire wheel to drill presses and how to safely shutdown the forges, our instructors will demonstrate proper use and guide you as you practice, learn, and finally demonstrate your ability to follow all the safety guidelines.

    Once you sign up, you’ll then take a series of online tests, which you must pass with a minimum of 85% prior to the start of your class.  Follow the online instructions to forward the test results to blacksmithclasses@gmail.com.  The on-site class is 4-hours in length and the class size is limited to 4 people.

    Please note: All workshops are released for member-only early registration for one week before they're available for general registration.  If you're unable to add this to your cart, you can wait for general release or join our membership program at any time!

  • Date: March 9, 2024 Time: 9 AM - 3 PM Location: Adam's Forge

    Instructor: Dossain Valencia

    Prerequisite: Any Discovery Class plus 2 or 3 project workshops or equivalent experience.

    Suggested skill level: Seasoned Beginner and up.  Participants should have solid blacksmithing skills and be confident using hand tools before moving to the power hammer.

    The railroad spike is one of the first knife projects every bladesmith makes; it's almost a rite of passage on your way to becoming a bladesmith. Step up your experience by signing up for our power hammer railroad spike class! You'll learn the safe operation of the power hammers at our facility, and also how to forge a well-made railroad spike knife with our knowledgeable instructors. Come down to Adam’s Forge to gain the skill and know-how to make your very own.

    In this class we'll discuss blade profiling under the power hammer, and we will walk through the basics of heat treatment and grinding to ensure that you walk out satisfied and proud of the blade you make with us. Bring your friends over for a good time and make some knives!

    Important note: At the end of this class there will be a test administered for every student that must be passed. To be approved to use the power hammers in an open forge session, you must have taken any power hammer course that we offer and passed the practical test.

    Please note: the first week that registration for this workshop is open, spots may only be purchased by members. If you find you are unable to register, please check back after that first week has passed, or consider becoming a member of Adam’s Forge. All proceeds go towards supporting our amazing organization, and membership will bring you exclusive events and opportunities, along with a community of other blacksmiths!

  • March 10, 2024

    Ursa Minor with Mark Aspery

    $225.00
    Date: March 10, 2024 Suggested Skill Level: Seasoned Beginner and up Prerequisites: Any Discovery workshop plus 3 or more project classes or equivalent experience. Confident, accurate hammer blows are required to successfully use hot punches. Time: 9 AM - 5 PM Location: Adam's Forge Instructor: Mark Aspery

    We are so excited to be able to offer this workshop with Mark Aspery, the man who wrote the book on blacksmithing. Literally. Actually, he wrote three books specifically for those learning blacksmithing.  You’ll learn how to squish hot steel around to create a sculptural bear head. These skills and tooling can be used to create many different animal and fantasy creatures. One of Mark’s superpowers is to help smiths understand how the material works and the design and use of tooling to accomplish the desired outcome.

    We’ll be looking at design considerations, material choices, and tooling while demonstrating some of the tips and techniques involved in forging precise, realistic pieces.  Mark is a certified journeyman smith with the Worshipful Company of Blacksmiths, a United Kingdom guild founded in London in 1324. He is also a certified Farrier with the American Farriers Association.

    This workshop runs from 9:00am – 5:00pm with an hour meal break.

    Please note: the first week that registration for this workshop is open, spots may only be purchased by members. If you find you are unable to register, please check back after that first week has passed, or consider becoming a member of Adam’s Forge. All proceeds go towards supporting our amazing organization, and membership will bring you exclusive events and opportunities, along with a community of other blacksmiths!

  • Date: March 17, 2024 Time: 9 AM - 3 PM Location: Adam's Forge Prerequisite: None. This is an introductory workshop Skill Level: Beginner, Seasoned Beginner and Intermediate Class runs from 9am - 3pm with a one hour meal break.

    Is there anything classier than a well forged bowie knife with a handmade sheath to complete the look? We offer you a one-day leather sheath introduction course to go along with your frontier belt knife or any other large bowie knife you may have! *read note below*. Now you can have a beautiful custom-made knife sheath and the skills to make more in the future as you progress in your bladesmithing journey. Leather working is an excellent way to expand your area of expertise and safely store your blades.

    In this introductory leather sheath course we will be discussing sheath pattern making, basic leather stitching, basic rawhide construction, and  leather tooling. We will be demonstrating a two-piece leather and rawhide constructed sheath and finishing it in a rugged western style to suit most larger blade aesthetics. We provide all tools and materials for the workshop.

    Important note: This class is offered as a follow up to the frontier belt knife, however students that did not take this class and want to take this introductory course must bring a knife that is at least over five inches and below 10 inches. Generally straight blades are also appropriate for this class as well.

    Prior leather working knowledge is not needed and everyone is welcome.

    Please note: All classes are released for member-only early registration for one week before they're available for general registration.  If you're unable to add this class to your cart, you can wait for general release or join our membership program at any time!

Title

Go to Top